Cart 2 india

Specification
AcceptedVoltageFrequency : 100v_240v_50hz_60hz
Brand : SunnyPro
Brightness : 200 lumen
BulletPoint1 : ELPLP93 V13H010L93 Replacement Projector Lamp Compatible with Epson EB-G7000W EB-G7100/NL EB-G7200W EB-G7400U EB-G7500U/NL EB-G7800 EB-G7805U/NL EB-G7900U EB-G7905U G7200WNL H749C H750C H751C H752C H753C H754C H762C Pro G7000W Pro G700WNL Pro G7100 Pro G7100NL Pro G7200W Pro G7400U Pro G7400UNL Pro G7500U Pro G7500UNL Pro G7805 Pro G7805NL Pro G7905U Pro G7905UNL
BulletPoint2 : Projector Lamp with Housng
BulletPoint3 : All lamps are produced by our own factory
BulletPoint4 : All lamps are tested at our factory before leaving the facility
BulletPoint5 : Cheaper Bare Lamp without Housing Also Available for Sale
Color : Elp9
ColorRenderingIndex : 100
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : application
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 606989725714
ExternallyAssignedProductIdentifier2 : 0606989725714
GpsrSafetyAttestation : 1
IncandescentEquivalentWattage : 200 watts
IncludedComponents : 1 *bulb with housing, 1* Instructions, 1*gloves
IndoorOutdoorUsage : indoor
ItemName : ELPLP93 V13H010L93 Replacement Projector Lamp Compatible for EPSON EB-G7000W EB-G7100/NL EB-G7200W EB-G7400U EB-G7500U/NL EB-G7800 EB-G7805U/NL EB-G7900U EB-G7905U G7200WNL H749C H750C H751C H752C
ItemPackageDimensions_Height : 13.5 centimeters
ItemPackageDimensions_Length : 10.1 centimeters
ItemPackageDimensions_Width : 11.4 centimeters
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
LightColor : color
LightType : Halogen
Manufacturer : SunnyPro
Material : Plastic
ModelName : VLT-XD3200LP
ModelNumber : Sun-Epson-1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Sun-Epson-9
PowerConsumption : 200 watts
PowerSourceType : Corded Electric
ProductDescription : 9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.

ProductSiteLaunchDate : 2018-09-09T07:00:00.000Z
Size : ELP93
SpecificUsesForProduct : Lamp
Style : ELP49
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111600
Voltage : 330 volts
WarrantyDescription : 210 days warranty.
Wattage : 7000 watts