Cart 2 india

Specification
AcceptedVoltageFrequency : 100v_120v_60hz
Brand : Mogobe
Brightness : 10000 lumen
BulletPoint1 : Part Number: BL-FU310B
BulletPoint2 : Compatible for:OPTOMA DH1017 OPTOMA EH500 OPTOMA X600
BulletPoint3 : We promise: 30 days refund and 180 days replacement
BulletPoint4 : Mogobe is responsible for all the descriptions
BulletPoint5 : Made by GOLDENRIVER. We will take strict quality test before shipment. If you have any problem, please contact us, we will try our best to help you.
Color : Black
ColorRenderingIndex : 4096
ColorTemperature : 3400 kelvin
CompatibleDevices : Home Theater
ConnectivityTechnology : DisplayPort
ControllerType : Push Button
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 691852103263
ExternallyAssignedProductIdentifier2 : 0691852103263
ExternallyAssignedProductIdentifier3 : 00048777114421
IncandescentEquivalentWattage : 240 watts
IncludedComponents : Projector Lamp
IndoorOutdoorUsage : indoor
ItemDisplayDimensions_Length : 2.48 inches
ItemDisplayWeight : 0.65 pounds
ItemName : Mogobe for BL-FU310B Replacement Projector Lamp with Housing for OPTOMA EH500 X600
ItemPackageDimensions_Height : 13.7922 centimeters
ItemPackageDimensions_Length : 10.8966 centimeters
ItemPackageDimensions_Width : 11.303 centimeters
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
LightColor : White
LightType : Metal Halide
Manufacturer : Mogobe
Material : Plastic
MaximumRange : 10 meters
ModelName : Projector Lamp
ModelNumber : LMP-H220 / LMP-E220 / LMP-D214
NumberOfItems : 1
PartNumber : LMP-H220 / LMP-E220 / LMP-D214
PowerConsumption : 650 watts
PowerSourceType : Corded Electric
ProductDescription : We Promise:
30 days refund and 180 days replacement.

How to replace the lamp:
1.Turn on the projector and unplug the power cord.
2.Wait one hour to allow it to cool thoroughly.(Caution: Do not remove the lamp unit from the projector right after use. The lamp will be hot and may cause burn injury.)
3.Turn the projector over. Open the lamp unit cover by loosening the screws with screwdriver.
4.Loosen the securing screws on the lamp with screwdriver. Hold the lamp unit well and put it out from the direction of the arrow.
5.Insert the new lamp until it’s securely in place. Tighten the screws. Fold the handle.
6.Connect the lamp connector and tighten the screws.
7.Close the lamp cover and tighten the screws.
8.Reset the Projector by following the Projector Operating Manual.

How can I contact Seller:
Click Orders in in the upper-right corner, find your order in the list, and click Get help with order.

How can I get a refund:
1.Go to Your Orders.
2.Locate your order in the list and click Problem with order.
3.Select your problem from the list.
4.Select Request refund.
5.Enter your comments in the text box.
6.Select Submit.

Compatible model:
OPTOMA DH1017 OPTOMA EH500 OPTOMA X600
ProductSiteLaunchDate : 2020-04-17T07:28:38.109Z
Size : BL-FU310B
SpecificUsesForProduct : Lamp
SupplierDeclaredDgHzRegulation : not_applicable
SupportedDevicesQuantity : 1
UnitCount : 1
UnspscCode : 45111600
Voltage : 110 volts
WarrantyDescription : 180days.
WarrantyDescription1 : All accessory lamps (unless otherwise specified) purchased separately are warranted for 90 days. Lamp warranty is subject to terms and conditions.
WarrantyDescription2 : Verification and approval. Applies to manufacturer's installed lamp only.
Wattage : 30 watts