Cart 2 india

Specification
AcceptedVoltageFrequency : 100v_240v_50hz_60hz
Brand : SunnyPro
BulletPoint : WD82737
BulletPoint1 : SunyPro BL-FP195A BL-FP195B SP.79C01GC01 SP.78H01GC01 Lamp for Optoma Projector GT1080 GT1080 DARBEE HD29 HD29 DARBEE
BulletPoint2 : Projector Lamp with Housng
BulletPoint3 : All lamps are produced by our own factory
BulletPoint4 : All lamps are tested at our factory before leaving the facility
BulletPoint5 : Cheaper Bare Lamp without Housing Also Available for Sale
Color : Elplp76
ColorRenderingIndex : 60
ConnectivityTechnology : DisplayPort
ControllerType : Push Button
ControlMethod : application
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6002032106846
ExternallyAssignedProductIdentifier1 : 606989727145
ExternallyAssignedProductIdentifier2 : 0606989727145
IndoorOutdoorUsage : indoor
ItemDisplayWeight : 6.5 pounds
ItemName : SunnyPro BL-FP195A BL-FP195B SP.79C01GC01 SP.78H01GC01 Lamp for Optoma Projector GT1080 GT1080 Darbee HD29 HD29 Darbee
ItemPackageDimensions_Height : 10.8 centimeters
ItemPackageDimensions_Length : 8.9 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
LightColor : white
LightType : LED
Manufacturer : SunnyPro
Material : Plastic
ModelName : ET-LAA110
ModelNumber : Sun-Epson-1
NumberOfItems : 1
PartNumber : Sun-Epson-9
PowerConsumption : 200 watts
PowerSourceType : Corded Electric
ProductDescription : 9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.

ProductSiteLaunchDate : 2019-07-01T07:00:00.000Z
Size : BL-FP195A-CB
SpecificUsesForProduct : Lamp
StreetDate : 2016-09-01T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111600
Voltage : 240 volts_of_direct_current
WarrantyDescription : 150 days.
Wattage : 230 watts