Cart 2 india

Specification
Brand : SunnyPro
BulletPoint1 : Compatible with OPTOMA DH1010 EH1020 EW615 EX612 EX615 GT50E GT50ECA GT750 HD1081 HD180 HD20 HD200X HD200X-LV HD20-LV HD22 HD2200 HD23 PRO800P SP.8EG01GC01 SP.8MY01GC01 TH1020 TW615-3D TX612 TX615 TX615-3D
BulletPoint2 : Brand new lamp with new housing. It is NOT just the bare lamp or bare bulb.
BulletPoint3 : All lamps are produced by our own factory
BulletPoint4 : All lamps are tested at our factory before leaving the facility
BulletPoint5 : Cheaper Bare Lamp without Housing Also Available
Color : Bl-fp230h
CompatiblePhoneModels : Microsoft
ConnectivityTechnology : DisplayPort
ConnectorType : USB
ControllerType : Push Button
ControlMethod : application
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier : 6087932155750
ExternallyAssignedProductIdentifier1 : 606989726650
ExternallyAssignedProductIdentifier2 : 0606989726650
IndoorOutdoorUsage : indoor
InputVoltage : 240 volts
ItemName : SunnyPro BL-FP230D/BL-FP230H/BL-FP230J/SP.8EG01GC01 Replacement Lamp Compatible for Optoma DH1010 EH1020 EW615 EX612 EX615 GT50E GT50ECA GT750 HD1081 HD180 HD20 HD200X HD22 HD2200 HD23 PRO800P
ItemPackageDimensions_Height : 13.7 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 11.2 centimeters
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
Manufacturer : Sunnypro
ModelNumber : BL-FP200E
MountingType : Wall Mount
NumberOfItems : 1
OutputVoltage : 5 volts
PartNumber : BL-FP200E-M
PowerSourceType : Corded Electric
ProductDescription : Model Number:BL-FP230H BL-FP230J
Application:Commercial,Engineering,Indoor,Professional,Sailing
Wattage:230W
Type:Bare Lamp with housing
Average Life (hrs):2500
Be used in projectors: for OPTOMA DH1010 EH1020 EW615 EX612 EX615 GT50E GT50ECA GT750 HD1081 HD180 HD20 HD200X HD200X-LV HD20-LV HD22 HD2200 HD23 PRO800P SP.8EG01GC01 SP.8MY01GC01 TH1020 TW615-3D TX612 TX615 TX615-3D


9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.
ProductSiteLaunchDate : 2018-09-20T07:00:00.000Z
SpecificationMet : oe
SpecificUsesForProduct : Lamp
Style : BL-FP200E
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111600
Voltage : 1 volts
Wattage : 230 watts