Cart 2 india

Specification
Brand : SunnyPro
Brightness : 4 lumen
BulletPoint1 : Compatible with OPTOMA DH1011 EH300 HD131X HD25 HD25-LV HD25-LV-WHD HD2500 HD30 HD30B
BulletPoint2 : Brand new lamp with new housing. It is NOT just the bare lamp or bare bulb.
BulletPoint3 : All lamps are produced by our own factory
BulletPoint4 : All lamps are tested at our factory before leaving the facility
BulletPoint5 : Cheaper Bare Lamp without Housing Also Available
Color : Bl-fu240a
ColorRenderingIndex : 114
CompatibleDevices1 : Television
CompatibleDevices2 : Laptop
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : application
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7599699562409
ExternallyAssignedProductIdentifier1 : 764653050934
ExternallyAssignedProductIdentifier2 : 0764653050934
FormFactor : Stationary
ImageContrastRatio : High
IncandescentEquivalentWattage : 50 watts
IndoorOutdoorUsage : indoor
ItemName : SunnyPro BL-FU240A Replacement Projector Lamp for OPTOMA DH1011 EH300 HD131X HD25 HD25-LV HD25-LV-WHD HD2500 HD30 HD30B HD39DARBEE Projectors
ItemPackageDimensions_Height : 13.7 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 11.3 centimeters
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
LightColor : Red
Manufacturer : Sunnypro
Material : Plastic
ModelNumber : LMP-H200
MountingType : Tabletop Mount
NativeResolution : 1920 x 1080
NumberOfItems : 1
PartNumber : SPROBTDPT45
PowerConsumption : 200 watts
ProductDescription : Model Number:BL-FU240A
Application:Commercial,Engineering,Indoor,Professional,Sailing
Wattage:200W
Type:Bare Lamp with housing
Average Life (hrs):2500
Be used in projectors: for Optoma DH1011 EH300 HD131X HD25 HD25-LV HD25-LV-WHD HD2500 HD30 HD30B


9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.
ProductSiteLaunchDate : 2018-09-20T07:00:00.000Z
Size : Platinum (Brighter/Durable)
SpecificUsesForProduct : Lamp
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111600
VideoEncoding : H.264, H.265 (HEVC)
Voltage : 120 volts
WarrantyDescription : 360 days.
Wattage : 200 watts