Cart 2 india

Specification
Brand : SunnyPro
BulletPoint1 : Compatible with Epson BrightLink 585Wi BrightLink 595Wi BrightLink Pro 1420 Wi BrightLink Pro 1430 Wi Powerlite 580/Powerlite 585W
BulletPoint2 : Projector Lamp with Housng
BulletPoint3 : All lamps are produced by our own factory
BulletPoint4 : All lamps are tested at our factory before leaving the facility
BulletPoint5 : Cheaper Bare Lamp without Housing Also Available for Sale
Color : Elplp80
ConnectivityTechnology : DisplayPort
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 606989724908
ExternallyAssignedProductIdentifier2 : 0606989724908
GpsrSafetyAttestation : 1
IncludedComponents : Filter
IndoorOutdoorUsage : indoor
ItemName : SunnyPro ELPLP79/ELPLP80 V13H010L80/V13H010L79 Projector Lamp with Housing Compatible for Epson BrightLink 585Wi BrightLink 595Wi BrightLink Pro 1420Wi BrightLink Pro 1430Wi Powerlite 580W
ItemPackageDimensions_Height : 13.7 centimeters
ItemPackageDimensions_Length : 10.1 centimeters
ItemPackageDimensions_Width : 11.7 centimeters
ItemPackageQuantity : 1
ItemShape : Reflector(R)
ItemTypeKeyword : video-projector-lamps
LightColor : White
LightType : Metal Halide
Manufacturer : SunnyPro
Material : Plastic
ModelName : MU06481 / MU06432
ModelNumber : APS80
NumberOfItems : 1
PartNumber : APS80
ProductDescription : 9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.

ProductSiteLaunchDate : 2018-09-10T07:00:00.000Z
Size : 6 x 6 x 5 inches
SpecificUsesForProduct : Lamp
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111600
Voltage : 12 volts
WarrantyDescription : 180days.
Wattage : 585 watts