Cart 2 india

Specification
BatteriesRequired : 1
Brand : WANSUPYIN
BulletPoint1 : Digital LCD display for easy readings, can display measured data and graphics
BulletPoint2 : Rotary switch control, a key measurement for convenient use
BulletPoint3 : Main chip is the DIP, easy for electronic enthusiasts to DIY or update the main chip
BulletPoint4 : Use 9V battery(not included), can also use DC power(DC 6.8-12V)
BulletPoint5 : Automatic shutdown, shutdown current is only about 20nA
ExternallyAssignedProductIdentifier : 7618032503586
ExternallyAssignedProductIdentifier1 : 0707457448675
ExternallyAssignedProductIdentifier2 : 707457448675
IncludedComponents : 7122B, 8923 × 2, Shoulder Bag, Instruction Manual
ItemName : 2023 160 * 128 Digital LCD Display DIY Kit Tester Transistor Diode Capacitance ESR Meter Signal Generator Tool Accessory
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcr-meters
Manufacturer : WANSUPYIN
MeasurementAccuracy : ±1.5%rdg±5dgt (20Ω)
ModelName : UNIVERSAL
ModelNumber : Eujgoovtf27uq9ghm
NumberOfItems : 1
PartNumber : WSA156300000
PowerSourceType : Battery Powered
ProductDescription : Features:
Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, Automatic identification of the transistor pinout.
Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current.
Support 2 resistors measurement, show its positive and negative, on-state voltage.
Resistance measurement maximum resolution 0.01Ω, can be measured up to 50MΩ.
Automatically test the pins of a component and show on the display.
Measure FET gate threshold voltage and gate capacitance.
For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H.
Can be used as signal generator and frequency meter: frequency range from 1Hz-2MHz and can generate 1%-99% PWM(pulse width modulation) signals

Specifications:
Type: DIY Kit
Display: 160*128 LCD
Power Supply :1 * 9V Battery(not included); DC 6.8-12V
Current Approx. 30mA
Resistance Measurement Max. 50MΩ
Resistance Resolution 0.01Ω
Capacitance Measurement 25pF~100mF
Capacitance Resolution 1pF
DC Voltage Measurement Up to 50V
Screen Size Approx. 3.7 * 3cm / 1.45 * 1.18in
PCB Size Approx. 7.8 * 6.2cm / 3.1 * 2.44in

Package Content:
1 Set DIY Kits

ProductSiteLaunchDate : 2023-09-12T03:01:01.796Z
Size : US Plug
Style : US Plug
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1