Cart 2 india

Specification
Brand : Yunseity
BulletPoint1 : Using materials, strong and , has a long service life
BulletPoint2 : Strict quality control and quality assurance, high safety factor, can be used with peace of mind
BulletPoint3 : Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold
BulletPoint4 : The uses 1° metal film resistor, with good performance
BulletPoint5 : Can automatically detect the pin layout of detected parts
IncludedComponents : No
ItemName : Strong MK-328 Transistor Tester, Capacitance Tester, for Test Triode Fieldeffect Tube
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcr-meters
Manufacturer : Yunseity
MeasurementAccuracy : 0.1mm
ModelName : Yunseitya9boxfh3qz
ModelNumber : Yunseitya9boxfh3qz
NumberOfItems : 1
PartNumber : Yunseitya9boxfh3qz
ProductDescription : 1. The uses 1° metal film resistor, with good performance
2. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
3. Using materials, strong and , has a long service life
4. Can automatically detect the pin layout of detected parts
5. Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold

Spec:
Item Type: MK-328 Transistor Tester
1. Key for automatic shutdown
2. Battery is possible because the shutdown current is only about 20mA
3. Automatic detection of NPN and PNP bipolar transistors, N- and P-channel MOSFETs, JFETs, diodes, diodes, unidirectional thyristors and bidirectional thyristors.
4. Automatically detect the pin layout of the detected parts.
5. Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold
6. Darlington transistor can be identified by the threshold voltage of high current amplification factor.
7. Measure the gate threshold voltage and gate capacity for MOSFET.
8. Measure and display up to four decimal digit values ??in the right dimension. All symbols are surrounded by the probe number of the Tester.So potentiometer. If the potentiometer is adjusted to one of its ends, the tester cannot distinguish the middle pin from the end pin.
9. The measurement with resolution is 0.1° and can measure up to 50M?
10. Can detect and measure a capacitor. It displays numbers with up to four decimal places in the right dimension. The value can be from 30pF to 100mF. The resolution can get 1pF.
11. For those with a capacity value higher than 2?F equivalent. The serial () has a resolution of 0.01? and displays two significant decimal digits.
12. Up to two diodes are displayed in the correct order and diode symbol. In addition, the forward voltage is also displayed.
13. The
ProductSiteLaunchDate : 2024-03-21T16:55:12.542Z
UnspscCode : 41113600