Cart 2 india

Specification
Brand : OUCRIY
BulletPoint1 : MULTIPLE TEST MODES Multifunction integrated circuit tester is a professional instrument designed for microelectronics engineers and maintenance personnel. Different test modes can be selected, such as 5V mode, 3.3V mode, AUTO mode, etc.
BulletPoint2 : MAIN USES Test 74HC series, 74LS series, CD4000 series, HEF400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic transistor identification, voltage regulator voltage identification, etc.
BulletPoint3 : EFFICIENT MEASUREMENT With more than 1,300 types of built in chip data and more than 420 types of transistor data , covering most common devices within 24 pins, greatly reduce workload and improve work efficiency.
BulletPoint4 : TESTING TYPES Include logic device test, interface driver device test, op amp, comparison test, transistor identification, voltage regulator voltage value test, optocoupler.
BulletPoint5 : AUTOMATIC SHUTDOWN FUNCTION The integrated circuit tester will automatically shut down after 60 seconds without any operation. Small and portable design, suitable for circuit testing.
Color : Black Blue
ExternallyAssignedProductIdentifier : 7674970012603
IncludedComponents : No
ItemName : TSH‑06F Integrated Circuit Tester IC Transistor Meter with 5V 3.3V AUTO Modes for Microelectronics Engineers (with terminals)
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcr-meters
Manufacturer : OUCRIY
MeasurementAccuracy : 0.1mm
ModelName : OUCRIYmed1qxv5cz-11
ModelNumber : OUCRIYmed1qxv5cz-11
NumberOfItems : 1
PartNumber : OUCRIYmed1qxv5cz-11
ProductDescription : How to Use:
With 7 buttons on the panel which are up, down, left, right and Enter, and shortcut keys O and P.
Up and down keys are used to adjust the catalog and change the model number, left and right keys are used to move the cursor left and right to select the item to be changed. Enter key is used to switch the machine and execute test commands. Open the battery back cover, put in 2pcs AA 1.5V batteries (battery not included), and then close the battery cover. Press the Enter key for more than 2 seconds to boot, and the current battery voltage will automatically be displayed when the battery is turned on. Please replace the battery when the battery power is too low. The low voltage will affect the reliability and of the test results and automatically shut down.
Power On: Press the Enter key for more than 2 seconds to power on.


Package List:
1 x Tester (Battery Not Included)
3 x Terminal
1 x Manual
or
1 x Tester (Battery Not Included)
1 x Manual

ProductSiteLaunchDate : 2024-09-08T17:16:46.333Z
Size : With terminals
UnitCount : 1
UnspscCode : 41113600