Cart 2 india

Specification
Brand : PATIKIL
BulletPoint : This item is used and in working condition.
BulletPoint1 : LED Size: 2*5*7mm / 0.07*0.19*0.27 inch (Thickness*Width*Length); Pin Length: 17mm / 0.67"
BulletPoint2 : Made of high-temperature resistant material. The package contains a large number of bulbs that can be used at will, the bulbs are tiny but bright light, with low power consumption
BulletPoint3 : Connect the correct positive and negative poles, use the corresponding suitable DC voltage and current. If you have a higher voltage power supply, add a voltage limiting resistor(not included)
BulletPoint4 : Widely used for indicator light, science experiments, DIY, repair equipment and appliances
BulletPoint5 : Pay attention to using the corresponding voltage and current, and add a voltage limiting resistor (not included)
Color : Red
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : application
IndoorOutdoorUsage : indoor
IsElectric : 1
ItemName : PATIKIL 2x5x7mm x LED Light Lamp Bulb, 150Pcs Rectangular Bright Lighting Emitting Diode for Electronic Component Indicator, Red
ItemPackageDimensions_Height : 13.8 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : electronic-component-led-lamps
LightColor : Red
LightType : LED
Manufacturer : PATIKIL
Material : Copper
Material1 : Metal
Material2 : Plastic
NumberOfItems : 150
PartNumber : pta211222tt0225eu
ProductDescription : The LED bulb is two pins, light is only one color, can be used for DIY, lighting decoration, signal indicator, bulb replacement.

Specification
LED Color: Red
Light Color: Red
Material: Metal, Plastic
Voltage: 3-3.2VDC
Current: 20mA
LED Size: 2*5*7mm / 0.07*0.19*0.27 inch (Thickness*Width*Length)
Pin Length: 17mm / 0.67"
Packing List: 150 x LED Bulbs

Advantage
Made of high-temperature resistant material. The package contains a large number of bulbs that can be used at will, the bulbs are tiny but bright light, with low power consumption.

Instruction
The long pin of the LED is connected to the positive pole of the power supply, and the short pin is connected to the negative pole. Use the corresponding suitable DC voltage and current. If you have a higher voltage power supply, add a voltage limiting resistor(not included).

NOTE: Pay attention to using the corresponding voltage and current, and add a voltage limiting resistor (not included).
ProductSiteLaunchDate : 2022-03-11T07:05:36.275Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39101600
Voltage : 3.2 volts
Wattage : 20 watts