uxcell 1W 5V LED Chip Bulb, Light Beads 200lm Brightness High Bead COB LED Chip with Aluminum Plate for Floodlight Spotlight Replacement, 25 Pack(Blue Light 455-460K)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 2600/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : uxcell
Brightness : 200 lumen
BulletPoint : 10Pcs x 5 Colors = 50Pcs 5MM 2Pins Misty Flat Top LED Diffused White Red Yellow Blue Green Wide Angle Light Emitting Diode Lamp
BulletPoint1 : Specification: Light Color: Blue, Output Power: 1W, Input Voltage: 5VDC, Luminous Flux: 200lm, Color Temperature: 455-460K, Light Color: Blue, Outer Diameter: 20mm / 0.79 inch (OD), Material: Aluminum, Plastic, Package Content: 25Pcs x LED Chips.
BulletPoint2 : Advantage: It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light.
BulletPoint3 : Instruction:1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout. 2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads. 3. The LED light source board cannot connect directly to 220V.
BulletPoint4 : Application: The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.
BulletPoint5 : NOTE: The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.
Color : 455-460K Blue
ColorTemperature : 460 kelvin
CompatibleDevices1 : Camera
CompatibleDevices2 : Monitor
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier : 4174125538772
ExternallyAssignedProductIdentifier1 : 0732387203223
ExternallyAssignedProductIdentifier2 : 732387203223
IncludedComponents : Remote
IndoorOutdoorUsage : indoor
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
IsElectric : 1
ItemName : uxcell 1W 5V LED Chip Bulb, Light Beads 200lm Brightness High Bead COB LED Chip with Aluminum Plate for Floodlight Spotlight Replacement, 25 Pack(Blue Light 455-460K)
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 25
ItemShape : 5MM T1 3/4 LED
ItemTypeKeyword : electronic-component-led-lamps
LightColor : Blue
LightColor1 : Red
LightColor2 : Blue
LightType : LED
Manufacturer : uxcell
Material : Aluminum
ModelName : SMD
ModelNumber : a19102200ux0365
NumberOfItems : 25
NumberOfPieces : 25
PartNumber : a24022700ux0267
Pattern : Solid
PowerSourceType : LED Driver Power Supply
ProductDescription : The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.

Specification
Light Color: Blue
Output Power: 1W
Input Voltage: 5VDC
Luminous Flux: 200lm
Color Temperature: 455-460K
Outer Diameter: 20mm / 0.79 inch (OD)
Material: Aluminum, Plastic
Package: 25Pcs x LED Chips

Advantage
It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light

Instruction
1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout.
2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads.
3. The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.

NOTE
Please pay attention to the specifications and parameters of the COB LED lights
ProductSiteLaunchDate : 2024-04-15T10:37:26.520Z
Size : 5mm
SpecificUsesForProduct : Floodlights, Spotlight bulbs, Panel lights, LED downlights, Flashlights, Track lights, Stage lights
Style : 0805
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 25
UnspscCode : 39111500
Voltage : 5 volts_of_direct_current
WarrantyDescription : 2.
Wattage : 1 watts

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.