Cart 2 india

Specification
Brand : DEVMO
BulletPoint1 : MAX7219 is an integrated serial input / output common-cathode display driver, which connects your microprocessor to a 7-segment digital LED display with 8 digits; MAX7219 digital display control module, you can use it for Ar-duino.
BulletPoint2 : The module is compatible of 5V / 3.3V microcontroller; Only three IO ports are used to drive the eight digit display.
BulletPoint3 : Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays; PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen.
BulletPoint4 : Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01; Digital tube is 0.36 inch 4-bit integrated cathode digital tube; Common cathode.
BulletPoint5 : Note:VCC and GND do not reversed, it would burn the chip.51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines.
Color : Red, Black
InputVoltage : 2 volts
ItemName : DEVMO 4pcs 8-Digit 7 Segment Module MAX7219 8 Bit Digital Segment Tube LED Display Module Supports Cascade Eight Bit Serial 3 IO Ports Compatible with Ar-duino MCU/51/AVR/STM32
ItemPackageDimensions_Height : 12.3 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 11.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : led-segment-displays
Manufacturer : DEVMO
Material : copper
ModelNumber : SM497-MAX7219-4PCS
OutputVoltage : 2 volts_of_direct_current
PartNumber : SM497-MAX7219-4PCS
ProductDescription :

Description:
MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also a 8x8 static RAM that stores each data. Only one external register is used to set the current of each LED segment.
A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding.
The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data, there is an all LED light detection mode.

Feature:
Digital tube is 0.36 inch 4-bit integrated cathode digital tube
Common cathode
Only need three IO ports can drive 8 bit digital tube
The module compatible of 5V / 3.3V microcontroller (51 / AVR / STM32...)
PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen
Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01

Note:
VCC and GND do not reversed, it would burn the chip.
51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines.

Package Including:
4 * MAX7219 8 bit digital display module

ProductSiteLaunchDate : 2020-05-28T09:48:04.987Z
Size : 1 Piece
Style : Digital,Durable,Reusable
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43211900