Cart 2 india

Specification
Brand : NUOBESTY
BulletPoint1 : Location hole: 4pcs screw location hole, hole diameter: 2,2mm, the positioning of the module is easy to install, to achieve inter- module combination,display module drive chip,LED Segment Display Module
BulletPoint2 : Drive chip display module--the unit easily connects through the vcc, gnd, and clk pin and displays the digits in red light,Display Module Common Anode
BulletPoint3 : Adjustable brightness: 4- LED display module, adjustable LED brightness, clock point,display module common anode,Drive Chip Display Module
BulletPoint4 : Tube clock display--this unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance,Drive Chip Display Module
BulletPoint5 : Common anode display module--4- LED display module with LED brightness adjustable and clock point,Drive Chip Display Module
Color : Assorted Color
ItemName : NUOBESTY Flexible Led Display Modules 4- Digital Tube Display 0.36 Inches Led Brightness Control Stable Power Supply
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 1.97 inches
ItemTypeKeyword : led-segment-displays
Manufacturer : NUOBESTY
Material : resin
ModelNumber : NO1878TT00400AD2Z30PWUAUC
NumberOfItems : 1
PartNumber : NO1878TT00400AD2Z30PWUAUC
ProductDescription : Package List
2 x display modules

Characteristics
- Supply voltage: 3.3V-5V DC Drive Chip Display Module
- Module : 30-80mA (When 5V supply power) Display Module Drive Chip
- Size: 4.00X2.00X0.30cm/1.57X0.79X0.12in Common Anode Display Module.
- Color: As shown Tube Clock Display.
- Material: Resin.
- This unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance Display Module Common Anode.
- It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module LED Segment Display Module.
- Thanks to the you can control it using only 2 wires, leaving more pin available on your to connect other things.
- The Positioning holes in this LED Display Module 4 Bits has 4 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination.
- The unit easily connects through the VCC, GND, and CLK pin and displays the digits in red light.

Goods Description
LED Segment Display Module This module uses driver to drive four standard anode tubes.Tube Clock Display It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module
ProductSiteLaunchDate : 2025-03-29T10:31:01.178Z
Size : 4X2CM
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43211900