Specification Brand : Yuecoom BulletPoint1 : 0.36-Inch 4-Digit: LED display module has 0.36-inch 4-digit common anode red display module, using TM1637 driver chip, professional and practical BulletPoint2 : Single-Chip Control: Red light LED digital display only 2 signal wires are needed, controlled by a single-chip microcomputer BulletPoint3 : User-Friendly: Adjustable brightness digit adjustable brightness display module Digital tube with 8 levels of gray scale adjustable, user-friendly BulletPoint4 : Interface Voltage: LED display module control interface voltage can be 5V or 3.3V BulletPoint5 : Easy to Install: LED display module designed with 4 mounting holes for easy installation Color : Assorted Color CompatibleDevices : Raspberry Pi, Raspberry Pi Pico, Arduino, ESP32 CompatibleProcessorTypes : Raspberry Pi (BCM2711, BCM2837, etc.), Raspberry Pi Pico (RP2040), ESP32 GraphicsCardInterface : integrated IncludedComponents : No ItemName : Yuecoom LED Display Module, LCD Module Red Light LED Digital Display 4-Digit 7-Segments Module Adjustable Brightness Digit Adjustable Brightness Display Module ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 5 centimeters ItemPackageDimensions_Width : 3 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : led-segment-displays MainPowerConnectorType : 4+4-pin Manufacturer : Yuecoom Material : resin ModelName : RGB-Matrix-P5-64x32 ModelNumber : Yuecoommizox1uba6 NumberOfItems : 1 NumberOfLithiumMetalCells : 1 NumberOfPorts : 2 PartNumber : Yuecoommizox1uba6 ProductDescription : Features: This is a 0.36 inches 4-digit common anode red display module with TM1637 driver chip. It just need 2 signal wire to be controlled by single-chip microcomputer. Digital tube has 8 adjustable grey levels. The voltage of control interface can be 5V or 3.3V. Designed with 4 mounting holes, it is convenient to install.
Specifications: Voltage: 3.3V~5.5V (5V is recommended) Current: 30A~80A Size: 47 x 24 x 12mm / 1.85 x 0.94 x 0.47 GND: Ground VCC: Power supply DIO: Data input/output CLK: Clock signal