Cart 2 india

Specification
Brand : OPTURA HD OPTICS
BulletPoint1 : Using a lens hood can also provide physical protection for the front element of the lens, shielding it from accidental impact and scratches. Overall, a reversible lens hood is a practical and versatile accessory for improving image quality and protecting your camera equipment.
BulletPoint2 : The primary purpose of a lens hood is to reduce lens flare and ghosting caused by stray light entering the lens from various angles. This stray light can degrade image quality by reducing contrast and introducing unwanted artifacts.
BulletPoint3 : A 72mm reversible lens hood is an accessory designed to attach to the front of a camera lens with a 72mm filter thread size.
BulletPoint4 : Kit Included: 72MM Reversible Lens Hood+ Dust Blower+ Cleaning Kit
BulletPoint5 : 【Good Performance】---Lens hood are widely used in backlight photography and are generally used to avoid glare. However, glare may occur if the light source is in close proximity. Whether glare is eliminated or not, it can be observed clearly from the viewfinder.
Color : default
CompatibleDevices : For DJI Mini 4 Pro
CompatibleWithVehicleType : 1
ExternallyAssignedProductIdentifier : 7628370855094
IncludedComponents : 1*Lens Hood
ItemName : 72MM Reversible Lens Hood for Bower 85mm T1.5 Cine Lens
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : camera-lens-hoods
ItemTypeName : Lens Hoods
Manufacturer : OPTURA HD OPTICS
Material : Plastic
ModelName : Mrisata3f81n6sgb7
ModelNumber : Mrisata3f81n6sgb7
NumberOfItems : 1
PartNumber : VIV-OP-72MM-LH
ProductDescription : A 72MM reversible lens hood is particularly convenient because it can be mounted in two different positions: in the shooting position, where it extends forward to shade the lens from light, and in the reversed position, where it is flipped back over the lens for compact storage and transportation. This design allows photographers to keep the lens hood attached to the lens at all times without adding significant bulk to the camera setup when not in use.
ProductSiteLaunchDate : 2024-05-23T17:46:25.930Z
Size : 7.4x5.6x6.8cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
WarrantyDescription : 1