Cart 2 india

Specification
Brand : Advanced Girl
BulletPoint1 : PRESSURE SENSITIVE SEAL LINERS provide an extra level of protection compared to a basic foam liner. The polystyrene white foam coated liner insert seals for jars PREVENT LEAKS and preserve FRESHNESS of your dry or powder products.
BulletPoint2 : SEALING INSERTS provide an actual seal for different canning jars. These jar inner seals are coated with a torque activated coating. They are adhesive to GLASS and PLASTIC bottles and jars with metal or plastic caps and closures.
BulletPoint3 : 1.10 inches (28 mm) in DIAMETER, these jar sealers are used with any type of jars, bottles and cans, or other round neck containers, which are made of glass or plastic, and measure slightly less than 28 mm in outer diameter neck size.
BulletPoint4 : NUMBER 1 ADVANCED sealing technique used by professionals! NO INDUCTION SEALER or SHRINK BAND NEEDED with these liner seals. NO TOOLS, or heat gun REQUIRED! Just center your seal on the jar apply the cap and wait for 24 hours to adhere.
BulletPoint5 : This press and seal liner, cap sealer, will keep your herbs and spices dry and fresh! This single-use foam seal peels easily from container when needed.
Capacity : 5 liters
CareInstructions : Dishwasher Safe
Color : Red
ExternallyAssignedProductIdentifier : 4051189588380
ExternallyAssignedProductIdentifier1 : 0082652394430
ExternallyAssignedProductIdentifier2 : 082652394430
GpsrSafetyAttestation : 1
IncludedComponents : Lids with Rings
IsDishwasherSafe : 1
IsMicrowaveable : 1
ItemName : Torque Activated Pressure Sensitive Seals Cap Liners - 28 mm (1.10") -200 PCS -Made in USA- for Glass & Plastic Bottles & Containers - No Induction Sealer Needed
ItemPackageDimensions_Height : 14.6 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 11.4 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : canning-lids
Manufacturer : Woogoo
Material : Metal
Material1 : Plastic
Material2 : Metal
Material3 : Glass
Material4 : Foam
Material5 : Polystyrene
ModelName : CL-04-08-2021
ModelNumber : CL-04-08-2021
NumberOfItems : 1
NumberOfPieces : 120
PartNumber : FBA_31000
ProductDescription : These polystyrene botlle and jar foam liner seals coated with torque-activated adhesive
require no tools and no heat induction equipment.

For proper application consider the following recommendations:

● Make sure your pressure sensitive liner size matches the bottle or jar opening.
These 28 mm (1.10 inches) seals are to be used with any bottles or jars that use 28 mm caps

● Completely clean the jar top with clean cloth and alcohol to clear of liquid
and/or solids. Center jar seal on top of you plastic or glass bottle or jar, and apply. The white
side of the seal shall be facing down, the side with red letters shall be facing up.

● Screw metal or plastic cap on bottle. Make sure the liner and cap are tightly secured
on the container.

● Once the cap is applied, it should not be removed for at least 24 hours
to ensure proper adhesion. Although depending on your application, the adhesion
process might take significantly less time.

● Seals can be used with glass and plastic bottles or jars and with lined or unlined caps.
These pressure sensitive liners are best for use with powder or dry products.

● Avoid overfilling your containers!

● Once seal is removed, it cannot be reapplied.

● Not suitable for applications containing oil.
ProductSiteLaunchDate : 2019-03-25T07:00:00.000Z
Size : 28 mm
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52150000