Cart 2 india

Specification
Brand : Unndysrt
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0769092544471
ExternallyAssignedProductIdentifier2 : 769092544471
IncludedComponents : 1 * Magnetic Lifter，1 * Handle，1 * Hex Key
ItemName : 1320 LB Steel Magnetic Lifter - 600 KG Metal Lifting Magnet, Magnetic Hoist for Shop Crane, for Lifting Block Board and Metal Objects
ItemPackageDimensions_Height : 8.27 inches
ItemPackageDimensions_Length : 11.42 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : lift-magnets
Manufacturer : Unndysrt
Material : Steel, N42 Magnet, Rubber, Alloy
ModelNumber : Unndysrt
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : Unndysrt
ProductDescription : Description
This product has a lifting suction force of 1320 pounds, which can provide high efficiency for your lifting work. It is extremely easy to use. You only need to turn the handle left and right to control the acceleration of the object being lifted. The compact structure of the product can also save a lot of storage space for you. It will be a powerful assistant to your lifting work!

Application
This product is suitable for bridge building, dock shipbuilding, machinery lifting, automobile maintenance, power, engineering, transportation and mining for lifting steel plates, blocks, rods, columns, and other magnetic materials.

Specification
Material: Steel, N42 Magnet, Rubber, Alloy
Color: Yellow
Process: Coating, Galvanizing
Assembly Required: Yes
Max. Lifting Capacity: 600kg/1320lbs
Operating Temperature: -40~80℃/-40~176 ℉
Gross Weight: 15.20kg/33.78lbs
Product Size: 26.5*11*11.5cm/ 10.4*4.3*4.5 in
Package Size: 29*15*21cm/11.42*5.91*8.27in

Package Included
1 * Magnetic Lifter
1 * Handle
1 * Hex Key
1 * English Manual

Notes
1. Please clean the surface of the steel plate before use to prevent the magnetic force from decreasing. Please do not use the product on a rough surface.
2. Please do not control the handle without a steel plate under the magnetic lifter.
3. There are strict requirements on the thickness of steel plate when lifting by the magnetic lifter. For example, when the magnet lifter adsorbs round steel, the adsorption capacity produced by the same magnetic force is about 30% of the flat workpiece, but the maximum is not more than 50%.
4. Please note that the lifter should not be used at the edge of the lifter or vertically, and the centerline of the lifter should coincide with the centerline of the lifting object (i.e. balanced lifting).
5. It is strictly forbidden to overload (beyond the parameter range) during the lifting process, and it is strictly forbidden to have people under the lifting object, and the operator needs to keep a sufficient safety distance from the lifted object.
6. The lifted object should be kept basically stable in the lifting, and impact and large shaking are strictly prohibited.
7. The ambient temperature of the product should not exceed 176 ℉, and it is strictly forbidden to contact objects higher than 176 ℉.
8. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
9. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2025-01-10T08:43:35.422Z
Size : 1320lbs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101600