Cart 2 india

Specification
Brand : Chief
BulletPoint : Hydraulic Welded Pin-Eye Cylinder, 2 in Bore x 60 in Stroke, 3000 PSI
BulletPoint1 : Single-acting hydraulic cylinder with one port and spring return of piston rod after 1.97" stroke
BulletPoint2 : Round body with handle and single piston rod for use in linear applications
BulletPoint3 : Lightweight aluminum with hard-coat finish for durability and extended life
BulletPoint4 : 20-ton cylinder capacity for lifting or pushing
BulletPoint5 : Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately)
Color : As Shown
CompatibleWithVehicleType1 : Truck
CompatibleWithVehicleType2 : Bus
ExteriorFinish : Metal
ExternallyAssignedProductIdentifier1 : 0615986014578
ExternallyAssignedProductIdentifier2 : 615986014578
FitType : Universal
IncludedComponents : Hydraulic Welded Pin-Eye Cylinder, 2 in Bore x 60 in Stroke, 3000 PSI
ItemName : Chief WP Hydraulic Welded Pin-Eye Cylinder, 2 in Bore x 60 in Stroke, 3000 PSI
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 13.97 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-lifting-cylinders
LoadCapacity : 30.0 tons
Manufacturer : CHIEF
Material : Aluminum
MinimumHeight : 88 millimeters
ModelName : 165568
ModelNumber : RAC-202
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 287225
Pattern : Single Acting
ProductDescription : The Chief WP Welded Pin-Eye Hydraulic Cylinder is built for heavy-duty workloads and in rephasing applications where synchronization is needed to lift separate loads. For instance, it is the ideal actuator to use in agricultural seeding, tilling, fertilization, and harvesting machinery which employ several cylinders at once. Intended for double-acting applications, this hydraulic cylinder is capable of both pushing and pulling actions. The head port extends the piston in the rod as fluid is pumped into it and retracts when the flow reverses. This feature sets it apart from single action cylinders which are specifically made to perform only one of these movements. This universal hydraulic cylinder is very versatile. The rod end mount is equipped with a drilled pin-hole and is easily customizable to fit any size of rod end according to your requirements. Meanwhile, the base end mount has a welded steel cross-tube with grease zerks. For outdoor applications in locations with extreme weather and environmental conditions, our hydraulic welded cylinder is the best choice. All its seals are manufactured to US specifications. The tube seal is a buna O-ring with Polytemp hytrel backup, the rod seal is a deep polypak with a B-lip design, and the piston seal is a Hallite 755 with a wear ring. Our welded cylinder is compact at only 7.28 pounds, but with a forged steel base, it can carry a column load of 5300 pounds. Its narrow design is appropriate for small spaces. Furthermore, it is available in different sizes depending on various factors like your weight load, stroke and retract length needed, flow, application, and operating conditions.
ProductSiteLaunchDate : 2014-08-01T16:30:14.750Z
Size : 20-ton
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 30000000
WarrantyDescription : 1 Year