Cart 2 india

Specification
Brand : pzsmocn
BulletPoint1 : Collision sensor / micro limit switch module. Onboard micro limit switch / micro switch, is an electric switch that is actuated by very little physical force.
BulletPoint2 : When the micro limit switch/micro switch is activated, the sensor will output a low level signal and maintain a high level when released.
BulletPoint3 : Onboard snap-on JST-3P socket is easy to plug and unplug, and is equipped with a JST to DuPont female 3-Pin single-head Wire, length: 210mm.
BulletPoint4 : Micro switches are very widely used. can use this for any light or other electrical appliances, electronic equipment, automatic machine, car electric you want to activated.
CircuitType : 1-way
Color : Black
ConnectivityProtocol : Wi-Fi
ControlMethod : touch
ItemName : Pzsmocn Collision Sensor/Micro Snap Switch/Limit Module Compatible with Raspberry Pi and Arduino Board. for Smart Homes, Offices, 3D Printer and Teaching Interact with Robots.
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 5.2 centimeters
ItemTypeKeyword : electronic-component-limit-switches
Manufacturer : pzsmocn
Material : Copper
ModelNumber : PZSPZC001A
MountingType : Panel Mount
NumberOfItems : 1
NumberOfPositions : 1
OperationMode : automatic
PartNumber : PZSPZC001A
ProductDescription :

A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force. Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small motors, solenoids, lamps, or other devices.There is a press key on the sensor. During a collision, the sensor outputs a low level signal as the button is pressed, and maintains high level when released.

The module comes with a JST PA SMT 3-Pin horizontal sticker and a buckle socket. Also, a JST PA to DuPont female 3-Pin single-head wire is offered to facilitate wiring. Length: 210mm, buckle attached.

SPECIFICATIONS

Sensor Specifications:
Operating Voltage: DC 3.3V-5V
Dimensions: 28mm * 35mm * 8.4mm
Fixing Hole Size: 3mm

Wire Specifications:
Withstand Voltage: less than 50V
Withstand Current: less than 1000MA
Length: 21CM
Wire Sequence: Black-negative power supply, Red-positive power supply, Green-signal

PACKAGE CONTENT

1 * Crash Sensor
1 * JST-PA to DuPont 3P Wire

ProductSiteLaunchDate : 2020-07-24T14:06:36.209Z
SpecificationMet : Oem
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Limit Switch
UnitCount : 1
UnspscCode : 39122200