Cart 2 india

Specification
Brand : SOXAMARINE
BulletPoint1 : This Power Trim Sender Limit Switch Kit is for MerCruiser MC-I, R, MR, Alpha One, Alpha One Gen II and Bravo Sterndrives, The Trim Senders are located on the port side of the gimbal Ring and the other side is mounted on the starboard side
BulletPoint2 : Replaces for MerCruiser 805320A03, 805320A1, 805129A3, 17693A2, 63115A12, 88678A4, 88678A5, 96863A15, for Sierra 18-7633, Red Rhino MR-971
BulletPoint3 : The trim sender switch is used to send a signal to the Trim Gauge so you can see the level of the drive. And the Trim Limit Switch is a safety device which keeps the driver from over-trimming while under way
BulletPoint4 : Package Includes: Trim Limit Switch and Wire Leads, Tape and Line
BulletPoint5 : For use with for MerCruiser sterndrive applications, Not for use with SmartCraft systems
CircuitType : Not
ConnectorType : No
ControllerType : Ring
CurrentRating : 15 amps
IncludedComponents : 1x Trim Limit Switch, 1x Trim Sender Switch, 2 x Wire Leads, 1x Tape, 1x Line
InternationalProtectionRating : Not
ItemName : SOXAMarine 805320A03 Power Trim Sender Limit Switch Kit for MerCruiser MC-I R MR Alpha one, Alpha One Gen 2 and Bravo Stern Drives 805320A1 18-7633
ItemPackageDimensions_Height : 15.5956 centimeters
ItemPackageDimensions_Length : 8.1026 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-limit-switches
LightType : No
LowerTemperatureRating : 70 degrees_celsius
Manufacturer : ‎Soxa Marine Parts Manufacturer
Material : Plastic
ModelNumber : 805320A03, 805320A1, 18-7633
MountingType : Not
NumberOfItems : 1
NumberOfPositions : 1
OperatingVoltage : 120 volts
OperationMode : ON-OFF
PartNumber : 805320A03, 805320A1, 18-7633
ProductDescription :

SOXAMarine Power Trim Sender Limit Switch Kit for MerCruiser MC-I, R, MR, Alpha one, Alpha One Gen 2 and Bravo Sterndrives

Fits Following for MerCruiser Stern Drives:

MC-I

R

MR

Alpha one

Alpha One Gen 2

Bravo I II III

Replaces:

for MerCruiser 805320A03, 805320A1, 805129A3, 17693A2, 63115A12, 88678A4, 88678A5, 96863A15

for Sierra 18-7633

Red Rhino MR-971

Package Include:

1x Trim Limit Switch

1x Trim Sender Switch

2 x Wire Leads

1x Tape

1x Line

Why do you need to replace new switch?

Due to frequent usage, your switches are prone to damage from water intrusion. Water enters the switch and ruins the contacts. The wires tend to soften or rot with age and water leaks into the switch through the wires

What is trim sender limit switch?

The trim sender switch is used to send a signal to the Trim Gauge so you can see the level of the drive. And the Trim Limit Switch is a safety device which keeps the driver from over-trimming while under way

Where are the Installed

The Trim Senders are located on the port side of the gimbal ring and the other side is mounted on the starboard side. Professional installation is highly recommended

ProductSiteLaunchDate : 2024-07-16T07:00:00.000Z
SpecificationMet : No
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Not
TerminalType : Not
UnitCount : 12.3459
UnspscCode : 39122200
UpperTemperatureRating : 100 degrees_celsius