Cart 2 india

Specification
Brand : THKHIWIN
BulletPoint1 : The design of enlarged width increases the capacity of moment load
BulletPoint2 : Gothic arch contact design has high rigidity characteristic in all directions
BulletPoint3 : Steel balls will be held by miniature retainer to avoid the balls from falling out even when the block are removed from the rail installation
BulletPoint4 : All metallic components are made of stainless steel for anti-corrosion purpose
BulletPoint5 : lnterchangeable types are available in certain precision grades
ExternallyAssignedProductIdentifier1 : 0750656597002
ExternallyAssignedProductIdentifier2 : 750656597002
IncludedComponents : A linear block EGH15CA
ItemName : HIWIN Linear Guide EGH15CA EGH15 EGH15CAZAC EGH15CAZ0C/ZAH/Z0H GK Block Linear Carriage/Slider/Rail Bearings Motion Control for CNC Machine Parts 3D Printer Automation Industry Semi-Conductor
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : linear-motion-guides
Manufacturer : THKHIWIN
Material : Alloy Steel
ModelName : Mrisatar8k605pvyh
ModelNumber : EGH15CA
NumberOfItems : 1
PartNumber : EGH15CA
ProductDescription : EG Series - Low Profle Ball Type Linear Guideway Features of the EG Series Linear Guideway The design of the EG series offers a low profile, high load capacity, and high rigidity. lt also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies Additionally, the lower assembly height and the shorter length make the EG series more suitable for high-speed automation machines and applications where space is limited. The retainer is designed to hold the balls in the block even when it is removed from the rail. Proper Installation of Linear Guides In this section, we’ll explain in detail how to install THK linear guide in linear type applications. Step 1: Before mounting the linear guides, a highly recommended advice is to clean up all rough edges and contaminate objects. Important: Datum lines of linear guides are normally composed of antirust. So, brush the antirust with a cleanser before positioning. Spraying some low coherence grease can preserve the datum plane. Step 2: Place the linear guide on the base and secure it with the drive screw or other appliances, so it sits properly on the datum line nicely. Important: Don’t forget to examine the adjustment of the screw holes before tightening them. Tightening the screw forcefully can unalign the screw holes, which influences the accuracy and quality due to offset. Step 3: Sequentially fasten the bolts to make the rail more steady. Push the track against the datum line gently to improve the connection between them. Step 4: Through a torque wrench, tighten the bolts from the centre to both edges. Step 5: Repeat similar strides for installing the auxiliary rail and then install the slides on the rail independently. Don’t forget to gather all adornments, like lubricant fitting, grease fitting and seals in this stage. Otherwise, later on, it gets hard to gather the adornments because of less space. Step 6: Locate the table smoothly on the slides on both main and subsidiary rails. Step 7: Tighten the perpendicular thrust screw to settle the table and attach the table screws in the sequence.
ProductSiteLaunchDate : 2024-10-23T14:26:06.464Z
Size : L: 230mm / 9.06 inch
Style : MGW9 Rail + C Block
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24102000