Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install
BulletPoint2 : 60mmx70mmx6mm Y-shape 90A mechanical seal for piston and piston rod
BulletPoint3 : Working Speed: Less than 0.5m/s; Working Pressure: Less than 35Mpa; Working Temperature Range: -35°C to 100°C (-31°F to 212°F)
BulletPoint4 : Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity
BulletPoint5 : Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure
Color : Blue
ItemName : MECCANIXITY UHS Radial Shaft Seal 60mm ID x 70mm OD x 6mm Width PU Oil Seal, Blue Pack of 2
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemShape : Round
ItemTypeKeyword : lip-seals
LowerTemperatureRating : -196 degrees_celsius
Manufacturer : MECCANIXITY
Material : PU
ModelNumber : mea210510ee0278
NumberOfItems : 99999
NumberOfPieces : 1
PartNumber : mea210510ee0278
Pressure : 100 pounds_per_square_inch
ProductDescription : What is this?
UHS oil seal's inner and outer sealing lip are the same height, with a Y-shape cross-section.

Are there any advantages of the product?
PU seal is oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity, and easy to install.

How to use it?
Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering. Both piston and piston rod can obtain a good sealing effect.
Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

What will I get?
Color: Blue
Material: Polyurethane (PU)
Inner Diameter: 60mm
Outer Diameter: 70mm
Max. Outer Diameter: 72mm
Width: 6mm
Hardness: 90A
Working Speed: Less than 0.5m/s
Working Pressure: Less than 35Mpa
Working Temperature Range: -35°C to 100°C (-31°F to 212°F)
Cross Section Type: Y Shape
Package Contents:2 x Lip Seals
Size : 60x70x6mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
UpperTemperatureRating : 600 degrees_celsius