Specification Brand : TIANGUOHE BulletPoint : Excellent Performance: The water level detector can adapt to both high and low temperature environments. The operating temperature is 0-70 °C, and the compensation temperature range is 0-60 °C. In addition, the accuracy of the water level detector is very high. The accuracy is ± 0.5% FS. And it has good tolerance and strong overload capacity, which is twice the full scale pressure. Load Resistance: less than (U-10)/ 0.02Ω. BulletPoint1 : EASY TO USE: The water level sensor can operate at AC DC 0~110V(when AC voltage is used, series relay control is required), suitable for most power supplies BulletPoint2 : TECHNICAL PARAMETERS: Liquid level sensor float switch maximum power is 10W and the maximum is 100MΩ BulletPoint3 : TEMPERATURE : Stainless steel water level sensor can be used in the ambient temperature from ‑30 to +125℃, can work in most environments BulletPoint4 : WIDELY USED: Liquid water level sensor can be used in water dispenser, water heater, solar energy, air conditioning, humidifier, bathroom equipment, vending machine, oil , water tower, chemical liquid level control, kitchen equipment, water heater and other water heating equipment prevent dry water level sensor, has broad application prospects in automobile, industrial equipment, agricultural equipment, household appliances and other fields BulletPoint5 : MATERIAL: Liquid level sensor adopts 304 stainless steel and 316L material, and , pressure and , possess long service life ExternallyAssignedProductIdentifier : 6977740430432 IncludedComponents : Input Type Intelligent Liquid Level Sensor ItemName : Input Type Intelligent Liquid Level Sensor Detector ItemPackageDimensions_Height : 3.1 inches ItemPackageDimensions_Length : 9.8 inches ItemPackageDimensions_Width : 9 inches ItemTypeKeyword : electronic-component-liquid-level-sensors Manufacturer : TIANGUOHE ModelName : Generic49xbeg7qnd-13 ModelNumber : TIANGUOHEYEWEICHUANGANQI NumberOfItems : 1 PartNumber : TIANGUOHEYEWEICHUANGANQI ProductDescription : WaterProof Design :The probe of this liquid level gauge has undergone special welding waterproofing treatment and is waterproof to IP68 level. The shell is made of 316L stainless steel, which has the advantages of being sturdy, durable, impermeable, and anti-interference. The length of the waterproof cable is 65.6', which can accommodate the depth requirements of most water tanks and pools. ProductSiteLaunchDate : 2025-05-13T02:18:38.380Z Size : L=200mm Style : L=200mm SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnspscCode : 53000000