Cart 2 india

Specification
Brand : Mercoid
BulletPoint1 : Clean & Compatiable Fluids
BulletPoint2 : Accuracy: ±0.25% full scale (includes linearity, hysteresis, and repeatability).
BulletPoint3 : Output Signal: 4 to 20 mA DC, two wire.
BulletPoint4 : Electrical Connection: Wire pigtail.
BulletPoint5 : Electrical Protection: SBLT2: Lightning and surge protection.
ConnectivityProtocol : X-10
ConnectorType : Plug In
ExternallyAssignedProductIdentifier1 : 094704665207
ExternallyAssignedProductIdentifier2 : 0094704665207
InternationalProtectionRating : IP54
ItemName : Mercoid® Submersible Level Transmitter, SBLT2-15-60, 15 psi (34.63' w.c.), 60' Polyurethane Cable
ItemPackageDimensions_Height : 3.51 inches
ItemPackageDimensions_Length : 12.8 inches
ItemPackageDimensions_Width : 12.01 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-liquid-level-sensors
LowerTemperatureRating : -40 degrees_fahrenheit
Manufacturer : Dwyer Instruments, Inc.
Material : Polyurethane
ModelNumber : SBLT2-15-60
MountingType : Plug-In Mount
NumberOfItems : 1
NumberOfPositions : 1
OperatingVoltage : 120 volts
PartNumber : SBLT2-15-60
ProductDescription : SBLT2 and SBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Bullet nose design protects the diaphragm from damage. The SBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The SBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier. Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.
ProductSiteLaunchDate : 2012-05-25T22:37:04.941Z
SpecificationMet : Csd1
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Limit Switch
SwitchType1 : Pressure Switch
SwitchType2 : Temperature Switch
TerminalType : Pin
UnitCount : 1
UpperTemperatureRating : 150 degrees_fahrenheit