Cart 2 india

Specification
Brand : Murphy by Enovation Controls
BulletPoint : The DF755 Hydrostatic Head Level Switch is a diaphragm operated "hydrostatic head pressure" level switch. The DF755 is designed to start and stop electric driven pump(s) to maintain tank levels. It is also applicable to engine driven pumps. A pressure sensitive diaphragm operates a snap-switch that can be wired directly to electric pilot circuits to control pumps at predetermined levels. The SPDT snap-switch for this model is preset for a 4 in. differential in liquid level.
BulletPoint1 : Automatic coating adjustment optimizes sensor performance
BulletPoint2 : Submersible Ryton sensor with polypropylene cable for corrosive liquids
BulletPoint3 : Coating alarm proactively alerts user when cleaning is required
BulletPoint4 : 60VA relay selectable NO or NC via power supply wiring polarity
BulletPoint5 : Compatible with Smart Trak and Switch-Pak installation fittings
Color : E
ConnectivityProtocol : X-10
ControlMethod : touch
CurrentRating : 16 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7430988864814
FinishType : Finish
FitType : Universal
IncludedComponents : 1
InternationalProtectionRating : IP54
ItemName : Murphy by Enovation Controls DF755 Hydrostatic Head Level Switch (15700001)
ItemPackageDimensions_Height : 18.6 centimeters
ItemPackageDimensions_Length : 6.2 centimeters
ItemPackageDimensions_Width : 16.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-liquid-level-sensors
LowerTemperatureRating : -40 degrees_fahrenheit
Manufacturer : Murphy by Enovation Controls
Material : Aluminum
Material1 : polypropylene
Material2 : viton
ModelName : Water Level Sensor
ModelNumber : LZ12-1405
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 480 volts
PartNumber : DF755 (15700001)
PowerSourceType : Corded Electric
ProductDescription : The DF755 Hydrostatic Head Level Switch is a diaphragm operated "hydrostatic head pressure" level switch. A pressure sensitive diaphragm operates a snap-switch that can be wired directly to electric pilot circuits to control pumps at predetermined levels. The DF755 is designed to start and stop electric driven pump(s) to maintain tank levels. It is also applicable to engine driven pumps. The nitrile sensing diaphragm is impervious to most liquids and is sensitive enough to control levels with 1/4" (6 mm) repeatability. Materials include aluminum body, nylon bottom plate and a special alloy leaf snap-switch as standard. The DF755 is suitable for atmospheric tanks in a non-hazardous area. The SPDT snap-switch for this model is preset for a 4 inch differential in liquid level. Typical applications include salt water disposal systems, cooling towers, crude oil tanks, water/flood systems, diesel day tanks and sumps. SPDT snap switch is rated 5A @ 125, 250 or 480 VAC; 1/2A @ 125 VDC; 1/4A @ 250 VDC. Maximum pressure rating: 25 psi (172kPa [1.72 bar]).
ProductSiteLaunchDate : 2020-03-05T17:59:34.584Z
Size : Approx. 0 ~ 1meter / 0 ~ 3.3ft
SpecificationMet : CSA
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Pressure Switch
SwitchType1 : SPDT
SwitchType2 : Float Switch
TerminalType : Spdt
UnitCount : 1
UpperTemperatureRating : 250 degrees_fahrenheit
Voltage : 110 volts