SpecificationBrand : MySpool
BulletPoint1 : Detect the presence or absence of liquid substances, strong acids, strong alkalis, and other liquids in high-pressure or open containers.
BulletPoint2 : This sensor is temperature-independent and can detect liquid levels of cold and hot liquids.
BulletPoint3 : The sensing technology works with non-metallic containers such as plastic, glass, ceramics, and PVC. The sensing distance can be as much as 20 mm. The sensitivity can be adjusted for each sensor.
BulletPoint4 : This sensor was custom-made for MySpool by the manufacturer to extend the standard cable from 1 M (3-foot) to 1.5M (5-foot).
ExternallyAssignedProductIdentifier1 : 0689983037526
ExternallyAssignedProductIdentifier2 : 689983037526
ItemName : MySpool Non Contact Liquid Level Sensor with 5-Foot Cable, Water Level Control with High and Low Level Output, XKC-Y25-V
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 3 inches
ItemTypeKeyword : electronic-component-liquid-level-sensors
Manufacturer : MySpool
Material : ceramic
PartNumber : NC_LEVEL_S1
ProductDescription : This capacitive non-contact liquid level sensor uses advanced signal processing technology to detect liquids and particulate materials through pipes and non-metallic containers.
It can detect the presence or absence of various liquid substances, strong acids, strong alkalis, and other liquids in high-pressure or open containers. The presence or absence of liquids and powder can be determined.
This sensor is temperature-independent and can detect liquid levels of cold and hot liquids.
The sensing technology works with non-metallic containers such as plastic, glass, ceramics, and PVC. The sensing distance can be as much as 20 mm. The sensitivity can be adjusted for each sensor.
This sensor was custom-made for MySpool by the manufacturer to extend the standard cable from 1 M (3-foot) to 1.5M (5-foot). The base sensor is XKC-Y25-V.
ProductSiteLaunchDate : 2024-05-19T14:06:43.541Z
SupplierDeclaredDgHzRegulation : not_applicable