Cart 2 india

Specification
Brand : KIMISS
BulletPoint1 : [Dust Proof Seal] Prevents cutting dust from entering the bearing for extended service life
BulletPoint2 : [High Design] Features high-speed bearings for accurate turning
BulletPoint3 : [Efficient Turning Support] Well-balanced and smooth, ideal for tailstock end work on your lathe
BulletPoint4 : [ Materials] Conical part made from t10 steel with 61-65 hrc hardness, #45 steel main body for durability
BulletPoint5 : [Medium Speed Usage] Designed for medium load environments in lathe operations
ItemName : Live Center Lathe Tool for Medium Speed Turning Work
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : live-centers
Manufacturer : KIMISS
ModelName : Kimiss7ct2a61fi3
ModelNumber : KIMISS7ct2a61fi3
PartNumber : KIMISS7ct2a61fi3
ProductDescription : [Dust Proof Seal] Prevents cutting dust from entering the bearing for extended service life
[High Design] Features high-speed bearings for accurate turning
[Efficient Turning Support] Well-balanced and smooth, ideal for tailstock end work on your lathe
[ Materials] Conical part made from t10 steel with 61-65 hrc hardness, #45 steel main body for durability
[Medium Speed Usage] Designed for medium load environments in lathe operations

Spec:

Description:
A lathe center is a tool that has been ground to a point to accurately position a workpiece on an axis. It has an included angle of 60°. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece.
Features:
Conical part is made from T10 steel, quenching hardness 61 to 65 HRC, the main body part is made from #45 steel, to use.
bearing design, using high speed bearing for
Dust proof seal preventing cutting dust enter into bearing thus prolong service time.
Designed for lathe in medium speed and medium load environment.
Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.
Specifications:
Type: MT1
Material: Alloy steel
Accuracy: 0.005
. RPM: 5000
Angle: 60°
Load Capacity: 660 pounds
Length: Approx. 116mm / 4.56inch
Outer Diameter: Approx. 39mm / 1.53inch
Weight: Approx. 360g
Package Included:
1 x MT1 Live Center
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your
ProductSiteLaunchDate : 2024-08-01T08:21:48.531Z
UnspscCode : 26111500