Cart 2 india

Specification
Brand : S-D-S Screws
BulletPoint : GROUNDING LOCKNUT 2"
BulletPoint1 : Drive Style : Socket T Nut Assortment By Rivet Nut Tool
BulletPoint2 : Nut And Bolt Assortment For Carriage Bolts Stainless Steel Washers
BulletPoint3 : Nuts And Bolts Organizers And Storage Small Locks
BulletPoint4 : Bulk Nuts Nylon Washers Wire Nuts Assortment
BulletPoint5 : Thread : Fine Big Nut Hardware Assortment
DriveSystem : External Hex
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 7630015741402
ExternallyAssignedProductIdentifier1 : 0653829563524
ExternallyAssignedProductIdentifier2 : 653829563524
FinishType : Unfinished
GradeRating : industrial
ItemName : Nut for Bolts Nuts Lock Nuts Nylon Thread Bolt Lock Rose Jam Bolts and Nuts Kit T Nuts and More Thread Lock Assortment for Stainless Steel Screws Nylon Jam Hex Nuts 5/16-24 (25 Pcs) Super-Deals-Shop
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-locknuts
Manufacturer : Imported
Material : Steel
Material1 : Stainless Steel
Material2 : Nylon
MeasurementSystem : Inch
MetalType : Stainless Steel
MetalType1 : Alloy Steel
MetalType2 : Stainless Steel
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 2008564
ProductDescription : Drive Style : Socket

Drive Size : 1/2"

Thread : 5/16-24

Quantity of Fasteners : 25

Width - Flat to Flat : 1/2"

Height / Thickness : 1/4"

Width - Point to Point : 0.552"

Threads Per Inch (TPI) : 24

Coarse or Fine Thread : Fine

Thread Direction : Right Hand

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose

Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt a lot of resilience, increased friction, so that the bolt is not easy to loose

Lock nuts for stainless steel bolts are highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold

Made with industrial-strength nylon collar capable enough to replace lock washers and prevent bolts from being exposed and coming out providing better security and firm hold

If you are experiencing galling, slow down installation speed, wait for heat to disperse, and apply a lubricant

It is used as a type of locknut, where it is "jammed" up against a standard nut to lock the two in place

Nylon insert lock nuts generate a large amount of friction and heat during installation

Performs better compared to lock washers as it is made out of non-corrosive material

It is also used in situations where a standardnut would not fit

A jam nut is a high profile type of nut


ProductSiteLaunchDate : 2017-10-09T07:00:00.000Z
Size : 5/16-24
UnitCount : 1
UnspscCode : 31161700