Cart 2 india

Specification
Brand : DAHSLNWKN
BulletPoint : Bearings
Color : One Color
ExternallyAssignedProductIdentifier : 8017271474258
ItemName : DAHSLNWKN TMP1105 NAST25 Roller Followers Bearing 25x52x16mm Separable Type Bearings NAST 25 R
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : magnetic-bearings
Manufacturer : DAHSLNWKN
ModelNumber : DAHSLNWKN
NumberOfItems : 1
PartNumber : DAHSLNWKN
ProductDescription : Bearings
Bearings
SEPARABLE ROLLER FOLLOWERS
Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporated in a thick walled outer ring.
Roller Followers include separable and non-separable types. These bearings are available in a variety of types to suit almost any kind of application. They are widely used for cam mechanisms and for linear motions of conveying equipment.
MOUNTING
1 In case of shield and sealed types, match the side surface correctly to the mating seating surface indicated by the dimension a shown in the dimension table, and fix them. (See Fig. 1.)
2 When mounting Roller Followers, pay special attention to avoid locating the oil hole of the inner ring within the loading zone. This may lead to a short bearing life. (See Fig. 2.)
3 When mounting Sealed Type Separable Roller Followers, do not cause the side plates to come off. If they come off, set them again in place taking care to avoid damaging the seal lips.
4 In case of Roller Followers without an inner ring, the shaft requires heat treatment and grinding finish. The recommended surface hardness of the shaft is 58-64HRC, and the recommended roughness of the shaft is 0.2 umRa or less.
Also, the outer ring and cage are guided by side surfaces of the mounting parts. Therefore, it is recommended that the side surfaces of the mounting parts be finished by grinding or at least by machining. (See Fig. 3.)
5 In Non-separable Roller Followers, the side plates are press-fitted. Therefore, when mounting the Roller Followers, do not push the side plates.
ProductSiteLaunchDate : 2024-09-14T07:24:08.733Z
Size : One Size
UnitCount : 1
UnspscCode : 31171500