Cart 2 india

Specification
AgeRangeDescription : adult
Brand : HIPICCO
BulletPoint : Bearing
BulletPoint1 : R155ZZ Bearings,(I.D.=5/32", O.D.=5/16", Thickness=1/8");
BulletPoint2 : Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
BulletPoint3 : Made of chrome steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
BulletPoint5 : Application: Widely used in Electric Fans, Automotives, RC Cars, RC Planes, RC Helicopters, Surgical Equipment, Household Electrical Appliances, Medical Instruments, Surveillance Systems, Plastic Card Printers, Robotics, Pulmonary Assist Devices, Cryogenic Coolers, Flow Meters, Fuel Control, among others.
Color : silver
ExternallyAssignedProductIdentifier : 9101149156243
GpsrSafetyAttestation : 1
IncludedComponents : Deep Groove Bearings
ItemName : HiPicco R155ZZ Deep Groove Ball Bearings, ID 5/32" x OD 5/16" x Width 1/8" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 20pcs
ItemPackageDimensions_Height : 7.7 centimeters
ItemPackageDimensions_Length : 1.1 centimeters
ItemPackageDimensions_Width : 5.9 centimeters
ItemPackageQuantity : 20
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Hipicco
Material : Alloy Steel
ModelName : lonrtyung
ModelNumber : R155ZZ
NumberOfBoxes : 1
NumberOfItems : 20
PackageLevel : unit
PartNumber : H20220831121
ProductDescription :

Specification：

• Model: R155ZZ
• Seal Type: Double Shielded
• Inner Race/Outer Race Material: Chrome Steel (GCr15)
• Cage Material: Stamping Steel
• Inner Diameter (d): 5/32"
• Outer Diameter (D): 5/16"
• Thickness (B): 1/8"
• Accuracy Class: P0 (ABEC-1)
• Noise Level: Z2
• Number of Pack: 20

Feature:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
•  With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
•  Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:

• Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
• Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

ProductSiteLaunchDate : 2023-09-01T06:52:45.194Z
Size : R155ZZ 5/32" x 5/16" x 1/8"
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31171500