Cart 2 india

Specification
Brand : Fafeicy
BulletPoint : Mpn: A 04868
BulletPoint1 : Item Type: Floor Heating Manifold Material: 304 Stainless Steel Treatment: Brushed Treatment Nominal Pressure: PN¡Ü1.2Mpa High and Low Temperature -20¡æ to +110¡æ Forming Process: 1700/T forging and tempering process Intelligent Structure: Visible and Adjustable Upper Flowmeter, Intelligent Lower Valve
BulletPoint2 : SEALING: EPDM O type sealing rings reduce noise to a very low level, and is highly for use.
BulletPoint3 : INTELLIGENT VALVE: Each branch of the return main pipe is equipped with a intelligent temperature control valve, convenient and safe.VISUAL FLOWMETER: Each branch of inlet pipe has a visual adjustable flowmeter with precise scale, can easily solve the problem of imbalance.
BulletPoint4 : 304 STAINLESS STEEL: The overall use of 304 stainless steel, effectively reducing friction and preventing scaling.EASY INSTALLATION: The inner wall is smoothly, the diameter of the main pipe is G1, built in thickened bracket is convenient for installation.
BulletPoint5 : Thread: Conforms ISO228 Standard Working Medium: Water, Non Corrosive Liquid Test Pressure: Mpa 0.8-1.0 Structure: The inlet water is spiral type soft EPDM sealing, the return water is intelligent temperature control valve core Branch Pipe: 1216
Color : AS Picture
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 745704189032
ExternallyAssignedProductIdentifier2 : 0745704189032
IncludedComponents : Vacuum Conical Reducer
ItemName : Floor Heating Manifold 4 Loop G1 304 Stainless Steel Heat Manifold Set with Visible Adjustable Flowmeter for Hydronic Radiant Floor Heating
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 42 centimeters
ItemPackageDimensions_Width : 38 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : manifold-fittings
Manufacturer : Fafeicy
Material : Stainless Steel
ModelName : Vacuum Conical Reducer
ModelNumber : Fafeicyo3q8ki7t5r
NumberOfItems : 1
NumberOfPieces : 20
PartNumber : Fafeicyo3q8ki7t5r
ProductDescription : How to Use:
1. Open the water inlet and return valves, the water in the main pipe enters the water separator, remove the red sheath of the flowmeter and screw up for adjustment (open the valve core of the water collector).
2. Automatic Exhaust: Loosen the cap to allow the exhaust to be in the automatic state and exhaust the air from the water collector.
3. Test the system in the fully opened state to see if there are any safety leakage points. The system test time is 24 hours, (the stable pressure value is 1.0 to 1.2MPa).
4. Conduct a pressure test for 24 hours and check whether there is water seepage or dripping at the connection points of each component. If there is any, close the inlet and outlet valves, repair the pipeline and retest.
5. The system test indicators can fully meet the user use requirements, and the pressure of the pressure system can be adjusted back to the normal use pressure, which can be determined according to the user use requirements.
Note: The maximum pressure value of the system cannot exceed 1.2MPa.

packing list:
2 x Water Separator Pipe
4 x Valve
2 x Pressure Gauge
10 x Fixing Accessories
8 x Screw
1 x User Manual


ProductSiteLaunchDate : 2025-03-06T00:00:00.000Z
Size : KF25 To KF40
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40100000