Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : DOUBLE EPDM O SEALING RING: The radiant heat manifold kit adopts double EPDM O sealing ring reduces noise to a very low level, and the safety performance is double protected
BulletPoint2 : ONE BODY FORMING FORGING TECHNOLOGY: The radiant heat manifold uses one body forming forging technology. Tempering improves the toughness and flexibility of the material
BulletPoint3 : TEMPERATURE CONTROL VALVE: Each branch of the manifold pipe is equipped with a temperature control valve, which can be switched off and on through the handle
BulletPoint4 : G1 INCH DIAMETER: The inner wall of the manifold kit is fluent and has no rough feeling. The main diameter is G1in. It comes with thickened support for easy and quick installation
BulletPoint5 : 304 STAINLESS STEEL: The valve stem in this radiant heat manifold kit uses stainless steel 304 to effectively reduce friction and prevent scaling. flowmeter, scale display, stable
ItemName : G1in Floor Heat Manifold 3 Loop Radiant Heat Manifold, G1in Floor Heat Manifold Kit Kit 3 Loop Radiant Heat Manifold with Temperature Control Valve for Hydronic Radiant Floor
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 42 centimeters
ItemPackageDimensions_Width : 38 centimeters
ItemTypeKeyword : manifold-fittings
Manufacturer : WALFRONT
ModelName : Walfrontagpiu89r5m
ModelNumber : WALFRONTagpiu89r5m
PartNumber : WALFRONTagpiu89r5m
ProductDescription : 1. [TEMPERATURE CONTROL VALVE] Each branch of the manifold pipe is equipped with a temperature control valve, which can be switched off and on through the handle.
2. [304 STAINLESS STEEL] The valve stem in this radiant heat manifold kit uses stainless steel 304 to effectively reduce friction and prevent scaling. flowmeter, scale display, stable.
3. [DOUBLE EPDM O SEALING RING] The radiant heat manifold kit adopts double EPDM O sealing ring reduces noise to a very low level, and the safety performance is double protected.
4. [ONE BODY FORMING FORGING TECHNOLOGY] The radiant heat manifold uses one body forming forging technology. Tempering improves the toughness and flexibility of the material.
5. [G1 INCH DIAMETER] The inner wall of the manifold kit is fluent and has no rough feeling. The main diameter is G1in. It comes with thickened support for easy and quick installation.

Specification:
Item Type: Radiant Heat Manifold
Material: 304 Stainless Steel
Surface Treatment: Brushed finish
Nominal Pressure: PN≤1.2Mpa
High and Low Temperature -20 to +110℃
Forming Process: using 1700/T forging and tempering process
Intelligent Structure: upper flowmeter visible adjusting, lower intelligent
Thread: Thread standard in line with for ISO228 standard
Working Medium: Water, non corrosive liquids
Test Pressure: Mpa0.8-1.0
Structure: Spiral soft EPDM sealing for the inlet water, the return water for the intelligent temperature control spool
Branch Pipe: 1216

How to Use:
Water Distributor Instructions For Use
1. Open the inlet and return valves, the main water into the water distributor, remove the flowing meter red sheath and roll up the flowing adjustment (collector spool open).
2. Automatic exhaust loose small cover, let the exhaust to be in the automatic state, discharge the air inside the manifold.
3. Test the system in the fully open state to see if there are any safety
ProductSiteLaunchDate : 2024-11-08T00:00:00.000Z
UnspscCode : 40141600