SpecificationAgeRangeDescription : Adult
Brand : gFixer
BulletPoint1 : Manufactured with high precision for a perfect fit.
BulletPoint2 : Made from durable polyurethane for long-lasting strength and reliability.
BulletPoint3 : Strong, flexible, and waterproof (IPX7 standard).
BulletPoint4 : UV-resistant and designed for outdoor use.
BulletPoint5 : Compatible with Montana 600, 650, 650t, 610, 680, 680t
BulletPoint6 : Please check quality on real photo (Not 3D model)
Color : Black
CompatibleDevices : Montana 600, 650, 650t, 610, 680, 680t
ExternallyAssignedProductIdentifier1 : 0826713854828
ExternallyAssignedProductIdentifier2 : 826713854828
FormFactor : Cover
IncludedComponents : rubber button
ItemName : gFixer Rubber Power Button Compatible with Garmin Montana 600, 650, 650t, 610, 680, 680t (Flexible, Waterproof) Replacement Spare Part GP03283
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-gps-accessories
Manufacturer : gFixer
MapType : Navigational
Material : Reinforced Rubber
ModelNumber : Montana 650
NumberOfItems : 1
PaperFinish1 : matte
PaperFinish2 : smooth
PaperSize : 92 x 114 inches
PartNumber : NOAA12221
ProductDescription :
Spare part: Rubber power button compatible with Garmin Montana 600 (flexible, waterproof)
SKU: GP03283
MPN: GP03283
Weight: 0.04 oz (0.001 kg)
Material: Reinforced rubber (waterproof and flexible)
Сomplexity level: 5
(Level 5 - Moderate difficulty, requires disassembly of the case and the use of additional materials (glue, sealant, double-sided tape).)Necessary tools: screwdriver: T6; knife, plastic spudger
Compatible with: Montana 600, 650, 650t, 610, 680, 680t
Installation manual: - Remove the battery and clean the case to remove any dirt. Avoid getting it wet.
- The front part of the case is made up of a plastic base with a rubber layer on top. Use a knife to carefully slice through the rubber layer.
- Employ a plastic tool to peel off the old rubber layer from the button.
- Wipe the surface clean using ethyl alcohol.
- For enhanced adhesion, apply a primer such as LOCTITE SF 770.
- Apply adhesive evenly across the prepared surface to ensure strong adhesion and a waterproof seal. LOCTITE 454 is recommended.
- Position the button carefully and press firmly to bond the rubber to the plastic base. Allow it to set for 24 hours to ensure optimal adhesion and curing.
- Congratulations! You have successfully restored your device to working and waterproof condition!
ProductSiteLaunchDate : 2025-01-11T19:46:47.091Z
ShellType : Soft
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
Theme : Outdoor
UnspscCode : 43210000
WaterResistanceLevel : waterproof