Cart 2 india

Specification
Brand : BMIROAMDFE
BulletPoint1 : 【Well Made & Sturdy】There are 23 copper nails, 2 stainless steel nail and 1 drill bit,the INCLUDED drill bit should prevent them from bending when using them
BulletPoint2 : 【Easy to Use 】Drill a hole, hammer in the steel nail, take it out, then hammer in the copper nails. Just make sure you remove some bark and get low to the base of the tree - aim for an exposed root if possible
BulletPoint3 : 【DIY Projects】Use pure copper nails for electroculture and they seem to work well. They are super easy to use and can be be used for other
BulletPoint4 : 【Remove Stump Root】Pure copper nails will take time to see if they can kill a stump. It appears it works, but the hardness of the tree is the real factor for how many to use and time to work
BulletPoint5 : 【Ecosystem】Strong copper spikes for getting rid of a tree stump naturally and without harming the ecosystem
BulletPoint6 : Thanks to the tempering process applied after the hardening process, the breakage is prevented, the stress of the material is removed and optimum hardness is gained.
Color : Round Nails
ExternallyAssignedProductIdentifier1 : 0618202077845
ExternallyAssignedProductIdentifier2 : 618202077845
GpsrSafetyAttestation : 1
Hazmat1 : FIREWORKS
Hazmat2 : UN0333
Hazmat3 : 1
IncludedComponents : Solid Pure Copper Nails Spikes
ItemName : Solid Pure Copper Nails Spikes for Killing Trees Stumps Roots with Steel Nails/Drill Nails 26 Count
ItemPackageDimensions_Height : 9.4996 centimeters
ItemPackageDimensions_Length : 1.6002 centimeters
ItemPackageDimensions_Width : 7.8994 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : masonry-nails
Manufacturer : BMIROAMDFE
Material : High Carbon Steel
ModelName : Solid Pure Copper Nails Spikes
ModelNumber : Solid Pure Copper Nails Spikes
NumberOfBoxes : 1
PartNumber : Hilitand671weqrzao
PowerSourceType : hand_powered
ProductDescription : How to Use: The first use a hammer to bash away the bark on some roots near the base of the tree , to do is drive a few of them directly into roots, in holes you've first drilled with the bit. Then you drive the rest of the spikes into the stump around the base of the tree close to the ground, and not all around the top of the stump. They have been used for this problem traditionally and work nicely - a low-stress solution to trees with roots that keep invading the plumbing.
ProductSiteLaunchDate : 2024-07-09T12:49:32.406Z
Size : 100 Pcs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 26
UnspscCode : 27000000