Cart 2 india

Specification
Brand : Lamons
BulletPoint1 : SSS style 2007 packing is an interlock braid, utilizing SSS's unique proprietary PTFE/graphite yarn and a high temperature break-in lubricant
BulletPoint2 : This proprietary yarn is formed from expanded PTFE in which fine particles of Pure graphite have been encapsulated
BulletPoint3 : This packing is especially designed for services involving surface speeds and temperatures higher than those that can be handled by Pure PTFE packing
BulletPoint4 : 0-14 pH range; temperature (minimum -328 F, maximum 536 F) pressure: static to 200 bar (2900 psi); rotating to 35 bar (507 psi); reciprocating to 100 bar (1450 psi); shaft speed 4921 FPM (25 M/s)
BulletPoint5 : 4.2 ft. Per pound. Approximate yields +/- 10 percent
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 687965013933
ExternallyAssignedProductIdentifier2 : 0687965013933
ItemForm : Sheet
ItemName : Lamons Sterling Seal and Supply (STCC) 2007.562x1 Teadit Style 2007 Braided Packing, Expanded PTFE, Graphite, 9/16" CS x 1 lb. Spool
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : mechanical-seals
Manufacturer : Lamons
Material : Mechanical Pcking
Material1 : PTFE (Polytetrafluoroethylene)
Material2 : Stainless Steel
ModelNumber : 2007.562x1
NumberOfItems : 1
PartNumber : 2007.562x1
ProductDescription : Rotary shaft seals with PTFE sealing lips are sealing elements - ready for assembly - which produce the desired sealing effect through radial contact pressure on the shaft. Sealing performance in the receiving hole is achieved by compression fit according to ISO 16589-1. Radial seals with PTFE sealing lips are ideally suited for sealing rotating shafts. The requisite radial contact pressure is assured by selecting the suitable PTFE compound and sealing lip geometry as well as a special manufacturing process. To cover a wide range of application requirements, standard ranges have been developed. Type HN 2390 is used with pressurized media, while type HN 2580 is primarily used for pressureless service and/or with pressures slightly above atmospheric.
ProductSiteLaunchDate : 2016-03-28T08:00:01.000Z
Size : 1 pounds
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 40100000