Cart 2 india

Specification
AgeRangeDescription : adult
Brand : TMP1105
BulletPoint : Buyers Products C90S8, Clutch 120 Ft. lb. (8 groove)
BulletPoint1 : Model: CSK25PP; Type: One Way Bearing Clutches; Note: With Keyway
BulletPoint2 : Inner Diameter: 25 mm; Outer Diameter: 52 mm; Thickness: 15 mm
BulletPoint3 : Weght (g): 134.1; Quantity: 1 Lot = 1 PC
BulletPoint4 : Torque Capacity: 25*52*15mm; Structure: ONE WAY
BulletPoint5 : Coatings: Ant-Rust Oil; Surface Roughness: Ra 0.05; Material: STEEL
Color : One Color
Configuration : Vehicle Specific
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier : 8306045218243
ExternallyAssignedProductIdentifier1 : 724920124546
ExternallyAssignedProductIdentifier2 : 0724920124546
ExternallyAssignedProductIdentifier3 : 00808709571551
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
HandOrientation : right
IncludedComponents : Clutch
ItemDisplayWeight : 80 grams
ItemName : TMP1105 CSK25PP 1 PC One Way Bearing Clutches with Keyway 255215mm CSK6205PP Freewheel Clutch Bearings CSK205PP
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-mechanical-clutches
Manufacturer : 唐铭鲆544162-US
Material : Alloy Steel
ModelName : JCPJJPDZ-CKD255225X52X25MM
ModelNumber : JCPJJPDZ-CKD255225X52X25MM
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 24283583
PackageLevel : unit
PartNumber : 唐铭鲆544162-US
PocketDescription : Jetted Pocket
ProductDescription : CSK ONE WAY BEARING CLUTCHES

Type CSK is a sprag type clutch integrated into a 62 Series ball bearing (except sizes 8 and 40). It is bearing supported, shipped grease lubricated and protected against dust larger than .012"(.3mm) diameter. The use of additional "nylon" type seals is recommended especially when the working temperature exceeds 122°F (50°C).
Oil bath lubrication is also possible if the original grease is first flushed out using a suitable solvent.
Torque transmission is ensured by a press fit assembly into a rigid outer housing with N6 tolerance, and onto a shaft with n6 tolerance. The initial bearing radial clearance is set at C5, and is reduced if using the press fit as specified.
One race may be glued. If both races are to be glued, performance will be reduced or a C3 bearing clearance will be necessary.
Operating temperature range: 21 to 140°F (-6 to 60°C).

CSK..2RS

clutches are .197" (5mm) wider than a standard 62 Series bearing, as they are equipped with lip seals for wash down applications.

CSK..PP

features a keyway on both the inner and outer race. The recommended mounting tolerances are k6 on the shaft and K6 in a rigid housing.
An h6 tolerance on the shaft or H6 in the housing are also acceptable for a light press fit assembly.
Operating temperature range: 21 to 140°F (-6 to 60°C).
ProductSiteLaunchDate : 2021-04-05T10:51:58.985Z
Size : CK D2552 25x52x25mm
StreetDate : 2022-11-05T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500
WarrantyDescription : no warranty