Cart 2 india

Specification
BatteriesRequired : 1
Brand : JMT
BulletPoint1 : This adapter card to achieve SD card converted to SATA 15PIN + 7PIN interface SSD.
BulletPoint2 : OS Requirement: Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems.
BulletPoint3 : With the BIOS, the operating system together can support SATA,? plug and play, do not need any driver to be used.
BulletPoint4 : Support SATA GEN1, GEN2, the maximum data transfer rate of 150MB / s, 300MB / s respectively. SD supports up to 128GB as measured so far.
BulletPoint5 : Edge Opening Model: Support edge opening. In the user's device chassis slot squarely?on the SD card slot opening, you can achieve SD removable storage.
BulletPoint6 : * To reach PCIe 5.0 full speed, the CPU and motherboard PCIe slot and PCIe M.2 SSD should all be PCIe 5.0 features.
BulletPoint7 : * Experience seamless OS booting by reinstalling your OS and setting up BIOS/UEFI boot from this M.2 NVMe SSD. (Note: Some motherboards are too old to support OS booting. In this case, M.2 NVMe SSDs can be used as storage disks)
Color : Green
CompatibleDevices : Motherboard
CompatibleDevices1 : Computer
CompatibleDevices2 : Laptop
ConnectorType : SATA 15PIN + 7PIN
CurrentRating : 2.5 amps
ExternallyAssignedProductIdentifier : 9171046539074
ExternallyAssignedProductIdentifier1 : 788081187994
ExternallyAssignedProductIdentifier2 : 0788081187994
FinishType : Matte
HardwareInterface : pci_express_x16
ItemName : JMT SD Memory Card to SATA 2.5 inch Conversion Adapter Serial Port 15PIN+7PIN SSD Embedded Storage Adapter Support 128GB for PC Notebook MCA277
ItemPackageDimensions_Height : 15.2908 centimeters
ItemPackageDimensions_Length : 4.0894 centimeters
ItemPackageDimensions_Width : 10.2108 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : memory-card-adapters
Manufacturer : JMT
ModelNumber : N51071
NumberOfItems : 1
NumberOfPorts : 1
OperatingSystem : Windows 11, Windows 10, Windows 8, Windows 7, Linux, Mac OS
OperatingSystem1 : Windows
OperatingSystem2 : Linux
PartNumber : N51071
PowerPlugType : no_plug
ProductDescription : JMT SD Memory Card to SATA 2.5 inch Adapter Card Serial Port 15PIN+7PIN SSD Embedded Storage Conversion Adapter Support 128GB for PC Notebook MCA277

Warm Tips: SD card is not included.

Precautions:
Ù Before using this product, please insert the SD card into the corresponding SD socket, and then connect the SATA power supply and SATA data cable to the SATA host device. 
After powering on the device, the LED light blinks, indicating that the SD card data is read normally.
Ú After the first time use and SD card configuration change, you need to initialise the SD card operation and format it. 
After the formatting is completed, you can perform any data operation on the SD card.


Main performance:
Ù FC1307A + JM20330 dual chip.
Ú Size: smaller than 2.5" hard drive size. Can be used in notebook.
Û Equivalent to the industrial use of flexible insertion and removal of SSD, SD as a mobile hard drive to achieve flexible data storage.
Ü HDD can be used as system boot disk or data disk after adapter.
Ý SD supports high-speed card.
Þ SD supports up to 128GB as measured so far.
ß Support SATA GEN1, GEN2, the maximum data transfer rate of 150MB / s, 300MB / s respectively.
à with the BIOS, the operating system together can support SATA,  plug and play, do not need any driver to be used.
For plug and play: The BIOS, the operating system and the application program should in Good coordination.
Do not hot swap when reading or writing data to avoid data loss. 
Cold plugging and unplugging is generally recommended for mobile data storage.
ProductSiteLaunchDate : 2023-10-25T09:01:28.304Z
SpecificUsesForProduct : Gaming
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : 1 Year
WarrantyType : Limited