Cart 2 india

Specification
Brand : Sedna
BulletPoint1 : Direct mounting of two 2.5" SATA III SSd / Hdd on board
BulletPoint2 : Built in Power circuit, best for PC / MAC where no power connector available
BulletPoint3 : Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported ( Your mother board BIOS need to support this feature )
BulletPoint4 : Maximum capacity supported : 6T Tested
BulletPoint5 : No hardware RAID support
BulletPoint6 : M.2 to PCIe Adapter alternates colored lights in standby and flashes fluidly when reading or writing data.
BulletPoint7 : Read and write speeds are related to the version of PCIe, such as PCIe 2.0/3.0/4.0/5.0, and also to the version configurations supported by PCIe for the three key modules (SSD/PC motherboard/CPU), and the maximum read and write speed is limited by the low hardware configuration.
BulletPoint8 : Usually older computer motherboards do not support booting from PCIE, and booting a system from M.2 requires a newer and more modern chipset to do so.
BulletPoint9 : M.2 Adapter Package Including : ❶ M.2 PCIe X16 Adapter x1 ❷ SSD Spare bolt x1（Pre-installed on PCB） ❸ Screw Driver x1 ❹ Heat conducting silica gel pad x2 （thick + thin） ❺ Aluminum heat sink x1 ❻ Spring-loaded nails for mounting heat sinks x2 ❼ Plastic bolts for mounting heat sinks x2
Color : Black
CompatibleDevices : Computer/PC, MAC
CompatibleDevices1 : Laptop
CompatibleDevices2 : Desktop
CompatibleDevices3 : PC
ConnectivityTechnology : SATA
ConnectorGender : Male-to-Male
ConnectorType : PCI Express
CurrentRating : 1 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8435173451977
ExternallyAssignedProductIdentifier1 : 4895135727252
ExternallyAssignedProductIdentifier10 : 00112039989574
ExternallyAssignedProductIdentifier2 : 4895135707254
ExternallyAssignedProductIdentifier3 : 0652401875116
ExternallyAssignedProductIdentifier4 : 0652401875093
ExternallyAssignedProductIdentifier5 : 0112039989574
ExternallyAssignedProductIdentifier6 : 0168141442278
ExternallyAssignedProductIdentifier7 : 0172302672770
ExternallyAssignedProductIdentifier8 : 0810154015061
ExternallyAssignedProductIdentifier9 : 8101540150612
FinishType : Hdmi
GpsrSafetyAttestation : 1
HardwareInterface : pci
HardwareInterface1 : pci_x_16
HardwareInterface2 : pci_x_4
HardwareInterface3 : pci_x_8
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : Sedna PCI Express (PCIe) Dual 2.5 Inch SATA III (6G) SSD Adapter - Extended Single Side SSD Version (Built-in Power Circuit, No SATA Power Connector, Ideal for Mac)
ItemPackageDimensions_Height : 26.6 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 15.4 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : memory-card-adapters
Manufacturer : SEDNA
Material : Plastic
MediaType1 : SD Card
MediaType2 : SDXC
MediaType3 : CompactFlash
MediaType4 : MMC
MediaType5 : SDHC
ModelNumber : SE-PCIE-SSDX2-SATA6G
NominalPower : 10 watts
NumberOfItems : 1
NumberOfPorts : 2
OperatingSystem1 : Windows
OperatingSystem2 : Linux
OperatingSystem3 : Mac
PackageLevel : unit
PartNumber : SE-PCIE-SSDX2-SATA6G-EX-P
PowerPlugType : type_a_2pin_na
ProductDescription : Features :

Direct mounting of two 2.5" SATA III SSd / Hdd on board (SSD not included)
Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported (Your mother board BIOS need to support this feature)

Using standard low cost high perfermance 2.5" SSD instead of the much more expansive mSATA SSD Built in Power circuit, no power connection required. Best for PC / MAC where no extra power connection available
Can be used for installion of VMWare ESXI 5.5 as boot disk (need to inject sata-xahci-1.10-1.x86_64.vib to ESXI installation ISO file)

Specifications :

PCIE 2 Port SATA III (6G) Port
Support direct installation of two standard 2.5" SATA III SSD
PCI Express Specification Rev. 2.0
1-Lane (x1) PCI-Express with transfer rate 5Gb/s Full Duplex channel
Compliant with Serial ATA 3.0 Specification,Data transfer rate up to 6.0Gb/s
Backward compatible with SATA1.0/SATA2.0 specification
Maximum capacity supported : 4T Tested
Support NCQ
Driver supported Windows98SE /ME/ 2000/XP/Server 2003/Vista/WIN7/Win8/Win 8.1/ Win 10, Mac OS
Dimension : 20 x 120 x 230 mm

System Requirement :
Available PCIE 2.0 1X,2X,4X,8X or 16X slot on PC
Supported OS

Package Content :
PCIE SATA III SSD adapter
Driver CD
8 x Hdd mounting screw
(SSD / HDD in photo is not included)
1 x screw driver


ProductSiteLaunchDate : 2018-12-06T16:42:56.689Z
RecommendedUsesForProduct : GPS Navigation
Size : 3003K
SpecificUsesForProduct : PC, MAC
StreetDate : 2005-01-14T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : 1 year
WarrantyType : Extended