Specification Brand : Generic BulletPoint1 : ☆The module is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Ar-duino users can directly use the Ar-duino IDE comes with an SD card to complete the library card initialization and read-write. BulletPoint2 : ☆3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply. BulletPoint3 : ☆Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal. BulletPoint4 : ☆Micro SD card connector: yes since the bomb deck for easy card insertion and removal. BulletPoint5 : ☆Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination. BulletPoint6 : 【What you get】: 1Pack 5 in 1 Camera Connection Kit (SD card and TF card not included) and a high standard of customer service. Please feel free to contact us if you have any questions. We provide 24 hours/5Years after-sale service for our customers. Color : Blue CompatibleDevices : Personal Computer CompatibleDevices1 : Tablet CompatibleDevices2 : Camera CompatibleDevices3 : Smartphone CompatibleDevices4 : Personal Computer ConnectivityTechnology : 6-pin Connector ConnectivityTechnology1 : USB Type C ConnectivityTechnology2 : Micro USB ConnectivityTechnology3 : Wi-Fi ConnectivityTechnology4 : Lightning Adapter ConnectorType : Micro USB DataTransferRate : 90 megabits_per_second ExternallyAssignedProductIdentifier1 : 682228946355 ExternallyAssignedProductIdentifier2 : 0682228946355 GpsrSafetyAttestation : 1 HardwareInterface : serial_interface HardwareInterface1 : usb3.0 HardwareInterface2 : usb HardwareInterface3 : usb_c HardwareInterface4 : lightning HardwareInterface5 : micro_sdxc HardwareInterface6 : usb2.0 ItemName : 2pcs Micro SD Card Module Storage Board 6-pin TF Card Memory Adapter Reader Module SPI Interface Compatible with Ar-duino ItemPackageDimensions_Height : 10.0076 centimeters ItemPackageDimensions_Length : 1.905 centimeters ItemPackageDimensions_Width : 8.7884 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : computer-memory-card-readers Manufacturer : Does Not Apply MediaType : microSD MediaType1 : Memory Stick Micro MediaType2 : SD Card MediaType3 : microSD MediaType4 : microSDHC MediaType5 : microSDHC MediaType6 : SDHC ModelNumber : XW-MEM-EXT-001 NumberOfItems : 2 NumberOfPorts : 1 OperatingSystem : Plug & Play OperatingSystem1 : Mac OS OperatingSystem2 : iOS OperatingSystem3 : Android PartNumber : CR-UTC3II BLACK-JWM ProductDescription : The module (MicroSD Card Adapter) is Micro SD card reader module, The microcontroller system can complete the reading and writing files through the file system and SPI interface driver. Ar-duino users can use the Ar-duino IDE comes with the SD card library to complete the card initialization and read and write.
Features: 1. Support Micro SD Card, Micro SDHC card (high-speed card). 2. The level conversion circuit board that can interface level is 5V or 3.3V. 3. Communication interface is a standard SPI interface. 4. Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground. 5. VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 6. 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; 7. Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; 8. Micro SD card connector: yes since the bomb deck for easy card insertion and removal. 9. mounting holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination.