Cart 2 india

Specification
Brand : Jet
BulletPoint1 : Flood coolant system (1-1/3 gallon coolant reservoir) and pump with flow control system extends blade life
BulletPoint2 : Fully-adjustable material depth stop for sawing repeatability and increased production
BulletPoint3 : Hardened and ground direct-drive worm shaft and bronze worm wheel transmits maximum torque to saw blade
BulletPoint4 : Heavy-duty cast iron frame base with easy access storage, provides a stable cutting platform
BulletPoint5 : Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
BulletPoint6 : Blade drive reduction gearbox operates in an oil bath for increased durability
BulletPoint7 : Quick tension and release mitering capabilities with stops at 45 degrees right and 45 degrees left
Color : Gray
CurrentRating : 20 amps
CuttingAngle : 90 degrees
ExternallyAssignedProductIdentifier1 : 731325266146
ExternallyAssignedProductIdentifier2 : 0731325266146
IncludedComponents : Cold Saw, Blade, Operating Lever, Work Stop, Hex Cap Screws with Nuts, Handle, Roller Assembly, Splash Plates, Coolant Tank w/ Pump
ItemName : JET 315mm/12-Inch Manual Ferrous Cold Saw, 2 HP, 230V 1Ph (Model CS-315-1)
ItemPackageDimensions_Height : 61 inches
ItemPackageDimensions_Length : 44.5 inches
ItemPackageDimensions_Width : 25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-metal-cutting-circular-saws
Manufacturer : JET Tools
Material1 : Steel
Material2 : Cast Iron
ModelName : CS-315
ModelNumber : CS-315-1
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 414229
PowerSourceType : Corded Electric
ProductDescription : [TWO INTERCHANGEABLE CUTTING HEADS] - Easily switch between knives for more efficiency.
[360 DEGREE ROTATION] - Cuts from any angle for versatile use.
[OPTIONAL 8MM DRILLING] - Compatible with various power tools for convenience.
[ADAPTABLE DESIGN] - Can be attached to an electric drill or pneumatic tool.
[Precise Cutting] - For precise cutting on different metal plates.

Specifications:
Features:
1.Two interchangeable cutting heads for cutting, easy to use and inexpensive.
2.360 degree rotating cutting head, cut from any angle or direction according to your needs.
3.Optional 8mm electric or pneumatic drill, rotation speed 1500-3000rpm.
4.The double head sheet metal cutting machine can be fixed on electric drill, pneumatic tool or drill.
5.It can be used for arbitrary cutting of metal plates.It is more accurate to install accessories.

Specification:
Condition: New
Item Type: Metal Nibbler
Minimum cutting radius: 12 mm
Allowed cutting thickness:
Plain steel sheet: 1.8 mm
Stainless steel sheet: 1.2 mm
Copper and aluminum plate: 2 mm
Plastic/Fiber Plate: 2mm

Package list:
1 host
1 handle.
1 removal key.

Note:
1.Please allow slight error due to manual measurement. Thank you for your understanding.
2.Monitors are not calibrated in the same way, the color of the item displayed in the photos may be slightly different from the real item.Please take the real one as standard.
3.Please note that the new type and old type of this product will be
ProductSiteLaunchDate : 2014-08-11T19:25:31.164Z
SpecificationMet : CSA/CUS
Speed : 52 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Metal
UnspscCode : 27112700
Voltage : 230 volts
WarrantyType : Limited
Wattage : 1426 watts