Cart 2 india

Specification
Brand : Banfluxion
BulletPoint1 : 【900W Brushless Motor】This mini metal lathe is equipped with strong 900W brushless motor. It has low noise and high efficiency, which helps save time and energy. It also saves you the trouble of replacing the brush.
BulletPoint2 : 【Metal Gear】This mini metal lathe is equipped with metal gear of wear resistance and accurate tansmission. It improves the service life of the lathe greatly.
BulletPoint3 : 【Infinitely Variable Speed】The spindle speed of the lathe is divided into high and low two gears: 50-1250rpm/m and 1250 -2500rpm/m, allowing both forward and reverse. The digital display panel of rotation speed is clear, which is convenient to operate.
BulletPoint4 : 【Safety Switch】This mini metal lathe has the emergency stop switch. It can stop immediately if there is something wrong during operation, which can protect the safety of the operator.
BulletPoint5 : 【Wide Application】This mini metal lathe can be applied for metal turning, screw threading, internal and external thread, wood turning, turning and polishing and so on.
ExternallyAssignedProductIdentifier1 : 0840403799527
ExternallyAssignedProductIdentifier2 : 840403799527
ItemName : BANFLUXION AC110V WM210V 8''X32'' Mini Metal Lathe Precision Inch Thread Metal Lathe with 900W Brushless Motor Variable Speed Metal Lathe
ItemPackageDimensions_Height : 20.08 inches
ItemPackageDimensions_Length : 49.21 inches
ItemPackageDimensions_Width : 18.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-metal-lathes
Manufacturer : Banfluxion
ModelName : Eujgoov2b0zcgx846-12
ModelNumber : Eujgoov2b0zcgx846-12
PartNumber : CB028032
ProductDescription :

Product Parameters:

Motor: 110V brushless motor

Voltage: AC110V 50/60Hz

Power: 900W

Length of center: 31.5"(800mm)

Swing Over Bed: 8.3"(210mm)

Rotary diameter of tool rest: 5.51"(140mm)

Spindle bore: 1.50"(38mm)

Diameter of chuck: 4.92"(125mm)

Width of lathe bed: 3.94"(100mm)

Number of Spindle Speeds: Infinitely variable speeds

Spindle taper: MT5

Knife rest labour: Horizontal four-station

Spindle rotation speed: 50-2500rpm

Range of Inch Threads(optional accessory ): 10-44T.P.I

Precision of the spindle: 0.01mm

Automatic feed range: 0.1mm-0.2mm

Maximum stroke of tool rest plate: 2.16"(55mm)

Maximum stroke of middle plate: 2.95"(75mm)

Maximum stroke of bottom plate: 26.8"(680mm)

Maximum stroke of tailstock sleeve: 2.36"(60mm)

Tail frame taper: MT2

Lathe sizes: 45.7"*13.0"*13.4"(116*33*34cm)

Item Included:

WM210V lathe * 1

Chuck Jaw * 3

The Screwdriver * 2

Open spanner *2

Hexagon Wrench *5

Chuck Spanner *1

Oil can * 1

Oil pan * 1

Gear *11 (75/72/70/66/60/60/52/50/48/40/30)

The Fuse * 1

English Instruction Manual *1

ProductSiteLaunchDate : 2024-06-21T07:23:28.107Z
Size : US Plug
UnitCount : 1
Voltage : 110 volts_of_alternating_current
Wattage : 900 watts