Cart 2 india

Specification
Brand : Agatige
BulletPoint1 : STANDARD INTERNAL THREAD: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision.
BulletPoint2 : EFFECTIVELY REPAIRED: In the event of a threading error or repair of a damaged internal threaded hole, the threaded hole can be economically and effectively repaired by using a threaded sleeve as a means of repair. The same screws can also be used after repair.
BulletPoint3 : WIRE SCREW SLEEVES: The use of wire screw sleeves for mm---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
BulletPoint4 : WIDE APPLICATIONS: Thread inserts are widely suitable for high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc. Including a box for convenient transportation and carriage, repairing the threaded hole of the component.
BulletPoint5 : SATISFACTION GUARANTEE: All our product offer return policy or money back guarantee, if you have any problem about your purchase, pls feel free to communicate with us by Email, we are always here to make everything right for you.
IncludedComponents : Metric Thread Repair kit
ItemName : 20 Pcs Thread Inserts Repair Kit, M9x1.25 Female Thread Repairing Accessory Assortment Rethreading Kit Thread Repair Sleeve Thread Repair Tool for Automotive Parts
ItemPackageDimensions_Height : 6.3 inches
ItemPackageDimensions_Length : 1.5 inches
ItemPackageDimensions_Width : 3.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-thread-repair-metric-kits
Manufacturer : Agatige
ModelName : Metric Thread Repair kit
ModelNumber : JMSMSH-63
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Agatigee3ogm7uhbq
ProductDescription : Specification:
Item Type:Thread Sleeve
Material:Stainless Steel
Thread Insert Size:M9x1.25 Length:2D

Package List:
1 x Spiral Drill
1 x Screw Tap
1 x Wrench
1 x Break Pin Tool
1 x Hex Wrench
15 x Thread Repair Insert

Note: InstructionsDrill holes using a matching drill bit.Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.

ProductSiteLaunchDate : 2023-08-23T01:49:56.926Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31161500
WarrantyDescription : 6 months