Cart 2 india

Specification
Brand : EVTSCAN
BulletPoint1 : Sturdy and High-Strength Design: Made from SUS304 stainless steel, these thread inserts ensure long-lasting performance, enhancing thread strength and wear for repairs on aluminum, copper, plastic, and more.
BulletPoint2 : Easy Thread Repair Solution: Suitable for fixing damaged female threaded holes, these inserts provide a cost-effective way to restore threads and convert between metric and inch thread sizes.
BulletPoint3 : Accuracy Engineering: With a diamond-shaped cross-section and high-accuracy design, these wire inserts offer smooth installation and precise, strong threads that meet industry standards for quality.
BulletPoint4 : Versatile Application: Ideal for use in low-strength materials like aluminum alloy, zinc alloy, and engineering plastics, improving thread performance and durability in a wide range of applications.
BulletPoint5 : Comprehensive Kit for Convenience: Includes 20 pieces of M14x2 thread inserts, offering everything you need to quickly repair and reinforce threaded holes without the need for complex tools or professional assistance.
ExternallyAssignedProductIdentifier1 : 0769135410152
ExternallyAssignedProductIdentifier2 : 769135410152
ItemName : EVTSCAN M14x2 Thread Repair Inserts Kit, Stainless Steel, High Strength, Wear, Easy Installation, for Aluminum, Copper, Plastic, and More (3D)
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-thread-repair-metric-kits
Manufacturer : EVTSCAN
Material : hss
ModelNumber : EVTSCANgxcv4dzprb-15
NumberOfItems : 1
PartNumber : EVTSCANgxcv4dzprb-15
ProductDescription : Item Type: Thread Inserts
Material: SUS304
Model: M14x2
Thread Specification: M14x2 (mm)
Outside Diameter Before Installation: Approx. 16.7 ~ 17.2mm / 0.7 ~ 0.7in
Diameter of Drilling Drill Bit for Installation: Approx. 14.5mm / 0.6in
1D/1.5D/2D/2.5D/3D:
Length After Installation: Approx. 14mm / 0.6in21mm / 0.8in
28mm / 1.1in
35mm / 1.4in
42mm / 1.7in
Number of Turns Before Installation: 5.4/8.7/11.9/15.2/18.4
Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.How to Use:
1. Drilling
Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.
2. Tapping
Use special taps for wire thread inserts to tap. The depth of the tapping must exceed the installation length of the thread inserts. After tapping, use a compressed air spray gun to blow out the debris. When the thread accuracy is high, check the tapped bottom hole with a special bottom hole plug gauge for wire thread inserts.
3. Installation
Put the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the T type slotting simple tool to install; Note: During
ProductSiteLaunchDate : 2025-02-28T18:48:37.004Z
Size : 3D
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500