Cart 2 india

Specification
Brand : EVTSCAN
BulletPoint1 : Sturdy and High-Strength Repair: Made from premium SUS304 stainless steel, these thread inserts enhance the strength and wear of low-strength materials like aluminum and plastic, ensuring long-lasting repairs.
BulletPoint2 : Cost-Effective Thread Repair: Easily fix stripped or damaged threads without replacing entire parts, saving you time and money while restoring the integrity of your workpieces.
BulletPoint3 : Convenient Conversion Between Thread Sizes: These inserts allow seamless conversion between metric and inch thread holes, offering a fast, efficient solution for a variety of applications.
BulletPoint4 : Easy Installation Process: Designed for easy installation with specialized tools, including a guide rod and wrench, ensuring a secure fit without damaging the workpiece.
BulletPoint5 : Versatile Application: Ideal for use in aluminum, copper, zinc alloys, plastics, and engineering materials, these inserts offer a universal solution for thread repair across multiple industries.
ExternallyAssignedProductIdentifier1 : 0769135410152
ExternallyAssignedProductIdentifier2 : 769135410152
ItemName : EVTSCAN Stainless Steel Thread Repair Inserts, SUS304, Metric and Inch Conversion, High Strength and Wear, for Aluminum, Plastic and Engineering Materials (2D)
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-thread-repair-metric-kits
Manufacturer : EVTSCAN
Material : hss
ModelNumber : EVTSCANvaq4ghxpwn-12
NumberOfItems : 1
PartNumber : EVTSCANvaq4ghxpwn-12
ProductDescription : Item Type: Thread Inserts
Material: SUS304
Model: M6x1
Thread Specification: M6x1 (mm)
Outside Diameter Before Installation: Approx. 7.5 ~ 7.9mm / 0.3 ~ 0.3in
Diameter of Drilling Drill Bit for Installation: Approx. 6.3mm / 0.2in1.5D/2D/3D:
Length After Installation: Approx. 9mm / 0.4in

12mm / 0.5in
18mm / 0.7in
Number of Turns Before Installation: 6.9/9.6/14.9
Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.

How to Use:
1. Drilling
Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.
2. Tapping
Use special taps for wire thread inserts to tap. The depth of the tapping must exceed the installation length of the thread inserts. After tapping, use a compressed air spray gun to blow out the debris. When the thread accuracy is high, check the tapped bottom hole with a special bottom hole plug gauge for wire thread inserts.
3. Installation
Put the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the T type slotting simple tool to install; Note: During the installation and screwing process of the thread inserts, there should
ProductSiteLaunchDate : 2025-03-01T01:18:49.357Z
Size : 2D
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500