Cart 2 india

Specification
Brand : CHNsalescom
BulletPoint1 : MB Series European style MIG MAG PTFE Graphite Liner 0.6 0.8 0.9 1.0 1.2 1.4 1.6
BulletPoint2 : Graphite wire feeding liner, has the very strong hardness and smoothness Can reduce wire maximum likelihood in the transmission process of wear Very suitable for aluminum wire and stainless steel wire welding requirements
BulletPoint3 : Suitable for aluminum welding wire and flux cored wire Teflon can be used continuously at a temperature of 260 ?, with the highest use temperature is 290-300 ?, extremely low friction coefficient, good wear resistance and excellent chemical stability
BulletPoint4 : Please check the wire feed wheel type of joint before purchasing, please confirm with the MIG gun you can joint matching You will receive 10cm longer than the length you choose In this way, you can install your welding torch and then cut to ensure 100% compliance with your welding torch length requirements
BulletPoint5 : Steel ----spring hose is suitable for 0.6 0.8 0.9 1.0 1.2mm diameter welding wire Teflon---Blue is suitable for 0.6 0.8 0.9mm diameter welding wire Teflon---Red is suitable for 1.0 1.2mm diameter welding wire Teflon---Yellow is suitable for 1.2 1.4 1.6mm diameter welding wire Graphite---OD: 4.0mm suitable for 0.6 0.8 0.9 1.0 1.2mm diameter welding wire Graphite---OD:4.7mm suitable for 1.0 1.2 1.4 1.6mm diameter welding wire
Color : Teflon---Blue
ExternallyAssignedProductIdentifier1 : 0191229021768
ExternallyAssignedProductIdentifier2 : 191229021768
GpsrSafetyAttestation : 1
ItemName : BINZEL European Style MIG Welding Liner PTFE Graphite Copper Chuck Euro KZ-2 (Teflon-Blue,5 Meters)
ItemTypeKeyword : mig-welding-equipment
Manufacturer : CHNsalescom
NumberOfItems : 1
PartNumber : AMALL2025
ProductDescription : MB Series European style MIG MAG PTFE Graphite Liner0.6 0.8 0.9 1.0 1.2 1.4 1.6

Graphite wire feeding liner, has the very strong hardness and smoothness
Can reduce wire maximum likelihood in the transmission process of wear
Very suitable for aluminum wire and stainless steel wire welding requirements

Suitable for aluminum welding wire and flux cored wire
Teflon can be used continuously at a temperature of 260 ?,
with the highest use temperature is 290-300 ?,
extremely low friction coefficient,
good wear resistance and excellent chemical stability

Please check the wire feed wheel type of joint before purchasing,
please confirm with the MIG gun you can joint matching
You will receive 10cm longer than the length you choose
In this way, you can install your welding torch and then cut to ensure
100% compliance with your welding torch length requirements

Steel ----spring hose is suitable for 0.6 0.8 0.9 1.0 1.2mm diameter welding wire
Teflon---Blue is suitable for 0.6 0.8 0.9mm diameter welding wire
Teflon---Red is suitable for 1.0 1.2mm diameter welding wire
Teflon---Yellow is suitable for 1.2 1.4 1.6mm diameter welding wire
Graphite---OD: 4.0mm suitable for 0.6 0.8 0.9 1.0 1.2mm diameter welding wire
Graphite---OD:4.7mm suitable for 1.0 1.2 1.4 1.6mm diameter welding wire
ProductSiteLaunchDate : 2021-04-08T01:16:48.226Z
Size : 5 meters
UnspscCode : 23271800