Details
One-touch Switch: The base of the product is equipped with a power switch. You only need to flick the switch to start or shut down the product, which is very simple and convenient.
Widened Edge: The edge of the base is widened to increase the contact area with the ground so that the whole machine can operate stably without shaking.
Large Opening: The larger opening of the milk pot (10.24 inches in diameter) makes it easier to pour milk and less likely to spill and waste.
How to Adjust the Cream Concentration
1. Turn off the separator power switch to stop separation.
2. After the separator stops rotating (note: it cannot be stopped manually), remove all parts in turn.
3. Adjust the screw, tighten the screw to the right to make the butter thinner, and tighten the screw to the left to make it thicker.
Package Included
1*Cream Separator Base
1*Milk Pot
2* Milk Mouths
1*Transformer
1*English User Manual
All Accessories Needed for Installation
Notes
1. The cross pin of the separator bowl should be stuck in the motor slot.
2. When cleaning the separation bowl, loosen the nut, take out all parts, wash them with hot water several times, wipe them dry, and then install them in the original order.
3. Before adding fresh milk at a proper temperature, please ensure that the machine is in working condition. The white switch lever in the milk pan is closed.
4. Please preheat the drum before the operation, otherwise, the separated cream will be easily blocked in the drum, especially in winter.
5. Only fresh milk can be separated. Processed dairy products sold in supermarkets cannot be separated.
6. Do not put water and milk into the motor.