Cart 2 india

Specification
Brand : Generic
BulletPoint : Motors
BulletPoint1 : ✦【Stone spindle parameters】: Spindle motor diameter: 100*300mm/3.94*11.8in, power: 4.5KW, voltage: 220V, current: 16A, frequency: 400Hz, speed: 24000RPM, torque: 1.79Nm, runout: less than 0.005 mm. CNC spindle motors are mainly used for engraving machines and frequency converters.
BulletPoint2 : ✦【4-bearing design】: Our CNC spindle motor adopts a 4-bearing design (2*7005C P4 and 2*7003C P4), which makes engraving more stable and more precise. The high speed of 24000RPM brings higher engraving efficiency.
BulletPoint3 : ✦【ER20 standard chuck】: ER20 chuck is cast with manganese steel material, with high hardness, high precision, high stability, good wear resistance, cone hole runout: 0.001mm, clamping range from 3.175mm-13mm, which can meet various precision machining needs.
BulletPoint4 : ✦【Cooling method】: The maximum speed temperature rise of the stone spindle motor is 10℃. The water circulation cooling method is used to effectively cool the heat generated by the spindle during high-speed rotation. The heat in the cooling water is dissipated into the air by heat exchange, and the temperature inside the spindle is always kept below 40℃ to ensure work efficiency and stability.
BulletPoint5 : ✦【Scope of application】: CNC stone carving spindles are widely used in the stone processing industry, including tombstone carving, stone carving artwork production, architectural decoration stone processing and other fields. Through precise carving and processing, various exquisite stone products can be created.
Color : One Color
ExternallyAssignedProductIdentifier : 7645770078946
IncludedComponents : ZYT83-10S 120W 110V Mini Lathe Motor 2500RPM
ItemName : 4.5KW 220V ER20 400HZ 100 * 300mm Water Cooled Spindle Motor Kit, 4 Bearings Speed 24000RPM, For Engraving Various Stone Products
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FDGYEJHHB
ModelNumber : FDGYEJHHB
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FDGYEJHHB
ProductDescription : Parameters:
Model: GDZ-27
Name: Water cooled spindle for stone carving
Power: 4.5Kw
Voltage: 220V
Speed: 24000r/min
Frequency: 400Hz
Current: 16A
Torque: 1.79Nm
Chuck: ER20 φ3.175-φ13
Dynamic balance: 0.1mg
Bearing: 2*7005C P4 and 2*7003C P4
Maximum speed temperature rise: 10℃
Maximum speed noise: 10db
Conical hole runout: 0.001mm
Lubrication: Grease
Cooling: Water cooling
Direction of rotation: Counterclockwise from the shaft extension end
Weight: 13kg
Main use: Mainly used in the stone processing industry, including tombstone carving, stone carving artwork production, architectural decorative stone processing and other fields.

Packing list:
1 x water-cooled spindle motor
1 x ER20
1 x 4-hole aviation plug
1 x 22 wrench
1 x 30 wrench
ProductSiteLaunchDate : 2024-09-11T10:48:40.286Z
Size : One Size
Speed : 2500 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 120 watts