Cart 2 india

Specification
Brand : RATTMMOTOR
BulletPoint : Bridgeport Milling Machine A4+11 Clutch Gear Bearing Bracket Vertical Mill Parts
BulletPoint1 : 【Package Include】: ①1 x 1.5KW Water Cooled Spindle Motor ER11 ②1 x 1.5KW VFD 220V③1 x 80mm Spindle Motor Mount ④1 x 80W Water Pump (Due to the different batches listed, you may also receive a 75W water pump) ⑤1 x 5m Pipe ⑥14 x ER20 Collet（1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm）
BulletPoint2 : 【1.5KW Spindle Motor】: ①This is a 220V-1.5KW water-cooled 5A Φ 80x188mm spindle motor come with a ER11 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counterclockwise.
BulletPoint3 : 【VFD Inverter Parameters】The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 220V(+/-15%) ,Output Voltage 220V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
BulletPoint4 : 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
BulletPoint5 : 【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
Color : Blue
ExternallyAssignedProductIdentifier1 : 0759154494080
ExternallyAssignedProductIdentifier2 : 759154494080
Horsepower : 3 horsepower
IncludedComponents1 : Base
IncludedComponents2 : Gantry
IncludedComponents3 : Spindle
IncludedComponents4 : Router Kit
IncludedComponents5 : Controller
ItemName : RATTMMOTOR 1.5KW Water Cooled Spindle Kit 80mm Spindle Motor 220V 400HZ+1.5KW VFD 220V Single to 3 Phase Inverter Variable Frequency Drive+80mm Spindle Mount+ER11 Collet+80W Water Pump for CNC Machine
ItemPackageDimensions_Height : 40.64 centimeters
ItemPackageDimensions_Length : 20.32 centimeters
ItemPackageDimensions_Width : 40.64 centimeters
ItemTypeKeyword : power-milling-machines
Manufacturer : RTM
Material : Aluminum
ModelName : CNC 3018-Blue 500w
ModelNumber : 3018-Blue
PartNumber : RTM1.5-220
PowerSourceType : AC/DC
ProductDescription : Package include:
1x 1.5KW ER11 water-cooled spindle motor 24000rpm 80mm 400Hz
1x 1.5KW VFD Inverter 220V input with 220V output
1x 80mm clamp cast aluminium bracket
1x 75W Water pump 220V 3.2M
1x 5M water pipes
1Set of ER11 collet(13pcs)(1~7mm)
ProductSiteLaunchDate : 2022-03-14T08:31:10.414Z
Size : 3 Axis 210x150x150mm
Speed : 24000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 25.1
UnspscCode : 39121000
Voltage : 220 volts
Wattage : 500 watts