Cart 2 india

Specification
AgeRangeDescription : adult
Brand : RATTMMOTOR
BulletPoint1 : 【Technical parameters】Model: JN500S Handle Model; Axis: X-axis; Power: 90W; Voltage: 220V; Weight: 6KG; Current: 2.8AMP; RPM Range: 2-210RMP; Torque: 650IN-L8.
BulletPoint2 : 【Ergonomic operation panel】The quick transfer buttons are designed on the left and right handles, ergonomic, easy and quick to operate, and the inching function can easily make the workpiece reach the machining position under any feed speed.
BulletPoint3 : 【Small size, big use】The left and right limit switches are equipped with patented, waterproof, oilproof and dustproof protection cover, which makes the switches not easy to be damaged. If the tool collides with the workpiece during rapid transportation, or if the left or right side momentarily reverses, there is a special patented safety device, so that the plastic gear and electronic parts will not be damaged.
BulletPoint4 : 【Scientific design】The speed adjustment effect is good, when the tool cutting work escort speed change is small, then the cutting surface precision is good and smooth, low-speed escort table will not shake.
BulletPoint5 : 【Long service life】Adopting new type of clutch device, the gear ratio between the transmission plastic gear and the motor center shaft is infinitesimal, the two gears will not return to the origin after running, the plastic gears have a longer service life, and the more you use the gears, the smaller the sound becomes.
BulletPoint6 : 【Designed for X-axis direction】It is mainly used for milling machine table to realize forward and reverse rotation and stepless manual speed regulation when working in X coordinate direction, replacing the traditional gearbox speed change mechanism. Its versatility is applicable to a wide range of machine tools, including radial milling, drilling and boring machines, small grinders and special-purpose machines, and ensures stable power delivery on a wide range of equipment.
Color : One Color
ExternallyAssignedProductIdentifier : 7646457580042
IncludedComponents : JN500S-220V X-Axis Power Feed for Milling Machine
ItemName : RATTMMOTOR JN500S Power Feed XYZ-Axis 650 in-lb Torque, 2-210RPM, 220V Milling Table Power Feed for Bridgeport and Some Knee Type Milling Machine (X Axis)
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 39 centimeters
ItemPackageDimensions_Width : 33 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : RATTMMOTOR
ModelName : JN500S-220V
ModelNumber : X Axis
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Milling and Drilling Machine Lathe
PowerSourceType : ac
ProductDescription : Package Include:
1* JN500S Power Feed X-Axis with power cord
1* Copper gear
1* Fixture plate
3* Fixture screw
1* Limit switch waterproof box
2* Limit spring
2* Limit block
1* Adjuster cushion

Parameters:
Model: JN500S handle model
Power: 90W
Voltage: 220V
Weight: 6KG
Current: 2.8AMP
Speed range: 2-210RMP
Torque: 650IN-LB

Product Characteristics:
Simple operation, convenient processing
Good speed adjustment efficiency, when the tool cutting work, the escort speed change is small, then the cutting surface accuracy is good; low-speed escort, the machine will not shake.
Safe and stable
The knife walker adopts 220V safety voltage, safe and stable operation, the ratio of transmission plastic gears and motor arbor gears is infinitesimal, the two gears will not return to the origin, the plastic gears have a long service life, and the more you use the gears, the smaller the sound.
Stable performance, precision and durable bearings
When fast escort, if the tool collision workpiece, or left and right momentary steering, equipped with a special safety device, the transmission of plastic gears and electronic parts will not be damaged. Use of small sound, no noise, high speed, effectively improve the work efficiency
Handle model
Handle button, convenient operation, support for uninterrupted processing, support for customized speed regulation.

Product details
Operation panel: Dust-proof, oil-proof, dust-proof protection cover, the switch is not easy to damage.
Copper core coil, more torque: Adopt spiral bevel gear, high efficiency, low noise.
Safety plug: Insulated rubber, not easy to break, safe to use.

X-Axis Power Feed Kit For Milling Machine
The benchtop milling machine power feed kit is made of solid materials and precision components, designed with manual knob, automatic button and feed reserve handle for easy operation, suitable for vertical knee milling machine, rocker milling machine, drilling and boring machine and small grinder, etc. The main purpose is used for the milling machine table in the X-coordinate direction of the working movement, to realize the forward and reverse rotation and the infinite human-induced speed regulation, replacing the traditional gearbox speed change mechanism.
ProductSiteLaunchDate : 2024-11-05T05:26:58.941Z
Size : 7.5KW 18000rpm 220V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 220 volts
Wattage : 90 watts