Cart 2 india

Specification
Brand : WAAZVXS
BulletPoint1 : Size: GDF-65F-800
BulletPoint2 : Speed regulation mode: can change the spindle speed through the three-phase output inverter, adjust the frequency of the inverter.
BulletPoint3 : Cooling method: wind cooling
BulletPoint4 : Power interface: optional 4 pin waterproof air adapter.
BulletPoint5 : The gas adapter labels "1", "2", "3", "4", "1", "2" and "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter.
Color : 800W 220V
ExternallyAssignedProductIdentifier : 7807792552808
Horsepower : 0.8 kilowatts
ItemName : WAAZVXS 65F-800W ER11 65MM Air-Cooled Spindle Motor 24000rpm 220v/380V AC Spindle for CNC Router Engraving Drill Press(Color:800W 220V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : WEIWEIBEIER
Material : Metal
ModelName : WWBR
ModelNumber : WWBR
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : WWBR
ProductDescription : Equipment grounding.
Power :0.8kW
Voltage: 220v 380v
Current: 4.0A
Frequency: 0-400 Hz
Speed: 0-24000 RPM
Jumping: less than 0.01mm
Diameter (mm):65mm
4 fully sealed angular contact bearings
Chuck: ER11
Grease lubrication
The working environment temperature of the spindle is usually -10~40.
Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular joint bearings can extend the life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. The ball bearing has low friction, low noise and long service life.
ProductSiteLaunchDate : 2024-05-23T07:08:55.654Z
Size : D65mm
UnitCount : 1